- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am not familiar with the overclocking but I afraid tried to do something. I researched about this subject and read a lot of pages. After a few changes my temperature values started to get higher when CPU is under stress.
In normal usage the temperature is 45-50°C. When I try to benchmarking, it goes beyond 80°C and almost reach the 90°C.
I am using Intel Extreme Tuning Utility which comes with MSI motherboard's disc. I guess I messed up. There is a lot of options to modify but the problem is I don't know which settings is the best.
I know (According to my research), every hardware overclocking limits is different. I don't have a problem with that. Because I am no longer interested in this topic. I just want to set my settings to default at least.
My native tongue is not English. I hope my writing is easily understood. Please help!
My specs:
CPU: Intel® Core™ i7-4790K
GPU: Sapphire R9 390 Nitro 8GB
Mainboard: MSI Z97 G43
Memory: Kingston HyperX XMP DDR3 CL9 1600 MHz 4x2 Dual Kit
Case/Power Supply: ZALMAN Z11 NEO 700W Mid Tower Case
OS: Windows 10 Pro
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
If you are looking for default settings for your processor, just need to load defaults on your motherboard BIOS, this would be:BIOS screen, Settings, Save and Exit and select Restore Defaults.
Allan.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you for the answer. I tried before for several times but it didn't work.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Default values are not available through Intel since this is established by the BIOS and computer manufacturer. You can find different settings by checking the processor datasheet: http://www.intel.com/content/www/us/en/processors/core/4th-gen-core-family-desktop-vol-1-datasheet.html http://www.intel.com/content/www/us/en/processors/core/4th-gen-core-family-desktop-vol-1-datasheet.html
Allan.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am not engineer and like I said before my native tongue isn't English. Hard to understand when the both come together. Can you look at the picture below and say it is fine?
Initially I made some changes and I used restore defaults. Then some settings were restored to default values. But some changes which I made were remained the same. I decided to use default values which it has shown in the Extreme Tuning Utility. But BIOS defaults and Extreme Tuning Utility defaults was not the same. So I am asking this question because of it.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
At this stage, I recommend waiting for another peer to chime in this thread and provide default settings for third part motherboard BIOS and your processor model.
Allan.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I hope you can get different information from other community members.
Allan.
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page