Nios® V/II Embedded Design Suite (EDS)
Support for Embedded Development Tools, Processors (SoCs and Nios® V/II processor), Embedded Development Suites (EDSs), Boot and Configuration, Operating Systems, C and C++
12627 Discussions

No display in NIOS II console

Naccy
Beginner
591 Views

Hello all,

I tried the 'NIOS II Application and BSP from Template' using a previously developed sopcinfo file, but the NIOS II console showed empty.

Here's what it says in the console: 

Using cable "USB-Blaster [USB-0]", device 1, instance 0x00
Processor is already paused
Reading System ID at address 0x10021980:
ID value verified
Timestamp value was not verified: value was not specified
Initializing CPU cache (if present)
OK

Downloading 08000000 ( 0%)
Downloading 08010000 (51%)
Downloading 0801F088 (94%)
Downloading 08020000 (97%)
Downloaded 125KB in 2.1s (59.5KB/s)

Verifying 08000000 ( 0%)
Verifying 08010000 (51%)
Verifying 0801F088 (94%)
Verifying 08020000 (97%)
Verified OK
Starting processor at address 0x080001B4



Labels (1)
0 Kudos
6 Replies
aikeu
Employee
558 Views

Hi Naccy,


I do not understand your desciption regarding the matter.

May I know which document which you refer for your work?

You mentioned about no display but able to see the logs from the console.


Thanks.

Regards,

Aik Eu


0 Kudos
Naccy
Beginner
545 Views

HI Aik,

Previously, I tried several examples in order to have some basic idea about the NIOS II system development. Unfortunately, all failed. 
Yesterday, I followed the steps from youtube: https://youtu.be/KjagfaiWuBM?si=cw8z-C7mycZCK3dy , when run into hardware, console did show me something, but NIOS II console totally empty.

What can I do for this situation? I dont think it is design or procedure issue.

Regards,
Naccy

0 Kudos
aikeu
Employee
521 Views

Hi Naccy,


May I know what is the board which you are using?


I see that there is something is different from my side as compared to your logs:

Using cable "DE-SoC on 10.107.209.7:3589 [3-1.2]", device 2, instance 0x00

Pausing target processor: OK

Initializing CPU cache (if present)

OK   


Anyway I suspect that you are using the wrong example project for your board.

Try to find an example project for the board which you are using for reference to run:

https://www.intel.com/content/www/us/en/support/programmable/support-resources/design-examples/design-store.html


Thanks.

Regards,

Aik Eu


0 Kudos
aikeu
Employee
507 Views
0 Kudos
aikeu
Employee
454 Views

Hi Naccy,


May I know any further feedback from my previous respond?


Thanks.

Regards,

Aik Eu


0 Kudos
aikeu
Employee
408 Views

Hi Naccy,


We do not receive any response from you to the previous question/reply/answer that I have provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.


Thanks.

Regards,

Aik Eu


0 Kudos
Reply