U-Boot

Altera_Forum · ‎10-11-2004

HI,

I'm looking for the link to download u-boot for nios-II of a stratix development board. And the documentation to know how install it to this board.

Best regards

Christian

Altera_Forum · ‎10-11-2004

Hi

<div class='quotetop'>QUOTE </div>

--- Quote Start ---

The bootm command is now implemented. You'll also

need to get the mkimage utility to create the u-boot

image file. Pre-builts, sources, etc updated at:

I tested by booting a gzipped Microtronix linux kernel

on the Altera 1C20 devkit board. Result were pretty

good:

vmlinux.bin: 1.6 MB (original binary)

vmlinux.img: 678 KB (gzipped u-boot image).

BTW: see the README in the mkimage zip file

for instructions.

Regards,

--Scott[/b]

--- Quote End ---

Just use this link from another thread. There you should find some more info.

Regards

GreateWhite.DK