- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Informe de contenido inapropiado
I have difficulty in running the application on nios2 system.
The process followed is: > Built application project hell with c file hello.c > the generated .exe - hello.exe added to filesystem project created earlier - hello.exe copied to target/bin folder of filesystem project > Filesystem project built again > Filesystem proj uploaded Now, my kernel proj(done earlier) and filesystem proj are uploaded (i.e. they are into Flash- which location?) Now to runthis perticular hello.exe what I am supposed to do. *Am I supposed to download the .sof for this linux_1c20 system and then how the hello.exe will run. After conf FPGA with the .sof 7 seg LED display counter and some pattern runs on LEDs My concern is how to run this .exe in filesystem Please guide on this Thanks and Regards- Etiquetas:
- Nios® II Embedded Design Suite (EDS)
Enlace copiado
3 Respuestas
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Informe de contenido inapropiado
Hi
All you do is browse to the directory where the hallo.exe file is located and type# ./hallo.exe this should run the program. From other location ,assuming the hallo.exe is in the /bin directory type# ./bin/hallo.exe (I think) Good luck Rual- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Informe de contenido inapropiado
--- Quote Start --- originally posted by rual@Oct 26 2005, 07:51 PM hi
all you do is browse to the directory where the hallo.exe file is located and type# ./hallo.exe
this should run the program.
from other location ,assuming the hallo.exe is in the /bin directory type# ./bin/hallo.exe (i think)
good luck
rual
<div align='right'><{post_snapback}> (index.php?act=findpost&pid=10599)
--- quote end ---
--- Quote End --- I think I need to do this from nios2 terminal but when I am giving nios2-terminal then user name as nios and password as uClinux as mentioned in reference guide its giving incorrect login Pl clarify: FPGA should be configured with .sof? Thanks and Regards
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Informe de contenido inapropiado
--- Quote Start --- originally posted by rau+oct 26 2005, 07:56 pm--><div class='quotetop'>quote (rau @ oct 26 2005, 07:56 pm)</div>
--- quote start ---
<!--quotebegin-rual@Oct 26 2005, 07:51 PM hi
all you do is browse to the directory where the hallo.exe file is located and type# ./hallo.exe
this should run the program.
from other location ,assuming the hallo.exe is in the /bin directory type# ./bin/hallo.exe (i think)
good luck
rual
<div align='right'><{post_snapback}> (index.php?act=findpost&pid=10599)
--- quote end ---
--- Quote End --- I think I need to do this from nios2 terminal but when I am giving nios2-terminal then user name as nios and password as uClinux as mentioned in reference guide its giving incorrect login Pl clarify: FPGA should be configured with .sof? Ok able to do it Thanks every body Thanks Rual Thanks and Regards <div align='right'><{post_snapback}> (index.php?act=findpost&pid=10600)</div> [/b] --- Quote End ---
Responder
Opciones de temas
- Suscribirse a un feed RSS
- Marcar tema como nuevo
- Marcar tema como leído
- Flotar este Tema para el usuario actual
- Favorito
- Suscribir
- Página de impresión sencilla