- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hi all,
I've recently upgraded from Quartus II 10.1 to 11sp1, because I need to compile the superloop_sss_rgmii_plus example which is developed for this last version. I successfully implement and P&R the example with Quartus, but when I switch to nios IDE, I cannot found the BSP menu and the other altera tools which are presents in the previously versions of the program. I attached a screenshot of nios IDE. The installed version is 11.0sp1 Build 208 with legacy package also (first i didn't install them, but in a second time i installed the package hoping resolving the problem but it didn't happened). In the "About Eclipse" window->installation details, installed software tab I see NiosII software build tools & system console and niosII software build tools for eclipse, so the software is installed; in fact through the niosII command shell I can compile my projects. Anyone has the same problem or know the trick to bypass it? many thanks AlessandroLink Copied
6 Replies
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please put a smaller screenshot, because this one is too big.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Ale,
I had the same problem when I first upgraded from version 10.1 to 11.0 of the Quartus II tools. I had to re-install the entire package to solve the problem. I'm not sure if there was a check box that I missed the first time, or just something quirky about the install process (very likely with Altera). Someone else had posted with the same problem previously, so it's not just us. I would try un-installing then re-installing QII 11.0 sp1 and keep a close eye on the check boxes during the process. Good luck!- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hi fheineman,
thanks for the reply! I don't understand if I have to tick the Legacy package check box... because if I understand well, this package is useful only for projects created with very old Quartus; for me that I have created projects with QII10.1 is sufficient the Nios II SBT package (that now is automatically installed when you select to install QII). Is that true? thanks again Ale PS: I see also the old post... now I reinstall all:)- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
--- Quote Start --- I don't understand if I have to tick the Legacy package check box... --- Quote End --- I would not check the Legacy package.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
thanks fheineman,
I've reinstalled all QII11sp1 and the NiosII menu in Eclipse is now appeared! I confirm that the legacy package is not necessary. thanks again Ale
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page