Hey dude, I reported the problem here and got a solution at lest to the recognition of the board on the pc. That's the deal, I plugged the board and it wasn't recognized, so I went to the device manager on Win7 and installed by hand the driver, till there ok, the Quartus II programmer ran ok. Then turned off the board and shutdown the pc, on the other day I turned everything on and nothing worked again... So I reinstalled the Quartus II and the other sofwares after the driver was already installed. But remember, you have to be sure to select the USB-blaster on Quartus II programmer, or it won't work, if it's not there, go on add hardware (I don't remember exactly how is it there, but it's something like that) on programmer and try by there. After that, it is working, I can manipulate the display and leds normally, I just didn't learned exactly how to design on the board... But, baby steps, I get there yet! Well, I don't know why or how this happend, but it did, so I hope it'll help you.
