Example design for Arria 10 GX DevKit On-Board Display Port

[hemanthkaja]

Hi,

I would like to use the On-Board Display Port from Arria 10 GX Development Kit. I have searched the forum and found this thread but it is not clear if there is an Example design for this purpose.

https://community.intel.com/t5/Programmable-Devices/Arria-10-reference-design-for-on-board-Display-Port/m-p/660171

[ventt]

Hi @hemanthkaja,

We sincerely apologize for the inconvenience caused by the delay in addressing your Forum queries. Due to an unexpected back-end issue in our system, your Forum case, did not reach us as intended. As a result, we have a backlog of cases that we are currently working through.

Please be assured that we are doing everything we can to resolve this as quickly as possible. This will take some time, and we appreciate your patience and understanding during this period of time. Your case will be attended to by AE soonest possible.

Thank you again for your patience and understanding, and we are committed to provide you with the best possible support.

Best Regards,

Ven

[ventt]

Hi @hemanthkaja,

There is an available Intel® Arria® 10 FPGA – DisplayPort Using Onboard Connector (TX Only) Design Example in the Intel FPGA Design Store. 

Websites:

1. Download Design Example: https://www.intel.com/content/www/us/en/design-example/749044/intel-arria-10-fpga-displayport-using-onboard-connector-tx-only-design-example.html

2. Visit FPGA Wiki: https://community.intel.com/t5/FPGA-Wiki/Arria-10-DisplayPort-Design-Example-using-on-board-connector-TX/ta-p/735205

Please note that:

Disclaimer: The Intel Arria 10 and Intel Stratix 10 Development Kit on-board DisplayPort TX board design implementation is NOT recommended as it does not allow PMA + PCS bonding. Users are advised to refer to the Bitec design implementation.

Thanks.

Best Regards,

Ven

[ventt]

Hi @hemanthkaja,

May I know if you have any further inquiries regarding this forum thread?

Thanks.

Best Regards,

Ven

[ventt]

Hi @hemanthkaja,

As there are no further inquiries, I will transition this thread to community support. Please login to ‘https://supporttickets.intel.com’, view details of the desired request, and post a feed/response within the next 15 days to allow me to continue to support you.

After 15 days, this thread will be transitioned to community support.

The community users will be able to help you with your follow-up questions.

We apologize for the inconvenience caused and thank you for your understanding.

Thanks.

Best Regards,

Ven