FYI: Cyclone 10 GX BSD file IDCODE not matching my actual device IDCODE

[BTijm]

Hi all,

I would like to report a mismatch in the IDCODE of part 10CX220YU484E5G.

In the Cyclone 10 GX BSD(L) file IDCODE found at the Intel website is different than the IDCODE of the actual device (!?)
IDCODE on the device: 0x02E120DD
IDCODE on website: 0x02EF20DD

(see https://www.intel.com/content/dam/altera-www/global/en_US/others/support/devices/bsdl/10CX220U484.bsd, at timestamp 24-01-2021)

[BTijm]

Link is not referring to the correct location, here once more:

https://www.intel.com/content/dam/altera-www/global/en_US/others/support/devices/bsdl/10CX220U484.bsd

[NurAiman_M_Intel]

Hi,

Thank you for contacting Intel community.

Please be noted that I am currently checking this with our internal team. Will get back to you soon.

Appreciate for your understanding.

Regards,

Aiman

[NurAiman_M_Intel · Accepted solution]

Hi,

Sorry for the delay. I have just received the confirmation for the IDCODE. The IDCODE in Cyclone 10 GX userguide(Table 89) state correct IDCODE 0x02E120DD.

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/cyclone-10/c10gx-51003.pdf#page=250

BSDL needs to follow the Quartus Database ID Code.

The BSDL File will be updated with new ID CODE.

I will send the updated BSDL file through email. This file will be upload and replace existing BSDL file in the webpage.

Hope this clarify.

Thank you.

Regards,

Aiman

[BTijm]

Hi,

Thanks for your email. It got in my spambox and I'm not so active on this site, so I just saw it now.

Anyway, I fixed the BSDL myself before I made the post. Just wanted to make sure you at Intel know the file is (still) incorrect so it can be corrected.