Community
cancel
Showing results for 
Search instead for 
Did you mean: 
NFerg1
Beginner
912 Views

I am unable to compile the preloader for GHRD build, Please help!

I’m running intel quartus prime standard edition (18.1), and intel SoC EDS (18.0), both with free evaluation licenses. I am trying to build the cyclone V GHRD. I follow the rocketboards.org procedure to compile the hardware design, and generate the preloader, but when I try to compile the preloader in the SoC EDS command shell I get this message:

nferguson@D14NFergusonDT ~/Desktop/DE10_NANO_SoC_GHRD/software/spl_bsp

$ make

tar zxf /cygdrive/c/intelFPGA/18.1/embedded/host_tools/altera/preloader/uboot-socfpga.tar.gz

tar: Error opening archive: Failed to open ‘/cygdrive/c/intelFPGA/18.1/embedded/host_tools/altera/preloader/uboot-socfpga.tar.gz’

make: *** [uboot-socfpga/.untar] Error 1

Here are links to the design flow I am following:

 

https://rocketboards.org/foswiki/Documentation/AVCVGSRDLTS

https://rocketboards.org/foswiki/Documentation/GSRDPreloader

https://rocketboards.org/foswiki/Documentation/AVGSRDCompileHardwareDesign

 

I would very grateful for any help or advice. Thanks!

 

0 Kudos
2 Replies
AnandRaj_S_Intel
Employee
51 Views

Hi,

 

Please check the previous thread below which deals with similar issues.

https://forums.intel.com/s/question/0D50P00003yyTozSAE/preloader-make-untar-failing?language=en_US

 

Let me know if you need any further assistance.

 

Regards

Anand

Fawaz_J_Intel
Employee
51 Views

Hello,

This is a known issue.

Kindly follow the Knowledge answer in this link:

https://www.intel.com/content/altera-www/global/en_us/index/support/support-resources/knowledge-base...

 

Thanks

Reply