Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Beginner
125 Views

MAX10 About absolute maximum rating

Jump to solution

What is the Absolute Maximum Rating voltage for analog input pins on the MAX10 Dual Supply Devices?

If Prescalar disabled and a voltage higher than the voltage value of the VREF pin is applied to the analog input pin, how many volts is allowed?

0 Kudos

Accepted Solutions
Employee
69 Views
0 Kudos
8 Replies
Employee
107 Views

Hello,

 

That will depend on user's configuration. Please refer to page 15 from this link https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/dp/max-10/PCG-01018.pdf 

 

Thank you.

0 Kudos
Beginner
104 Views

Hi!

The link page lists the power supply.

The question is not the power supply, but the maximum absolute rated voltage of the analog input pins and the allowable voltage when VREF is exceeded.

 

Best regards

0 Kudos
Employee
99 Views

Hello,

 

Thank you for emphasizing your point. You can refer to page 31 VREF I/O Standards Restriction, and page 32 for Voltage Maximum Rating (for 3.3 V or 3.0 V) from the document from this link: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/max-10/ug_m10_gpio.pdf 

 

Please let me know if you need more information.

0 Kudos
Beginner
95 Views

Hi!

The link page describes general-purpose I / O pins.

What I want to know is the absolute rated input voltage of the analog input pins and the permissible voltage when VREF is exceeded.

 

Best regards.

0 Kudos
Employee
88 Views

Hello,

 

The maximum absolute voltage for dual supply devices in Max 10 can be referred on page 4 from this document: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/max-10/m10_datasheet.pdf

 

Please make sure you do not put the value above that is suggested because that can damage your device permanently. 

 

Information of voltage input when it is prescalar disabled can be referred on page 33 of the same document. 

 

I hope this helps!

0 Kudos
Beginner
79 Views

Hi!

Is the absolute maximum input voltage of the analog input pin the same as the general purpose I / O pin on page 5 of the link document?

4.12V ?

ken-salt_0-1606436523364.png

Best regards.

0 Kudos
Employee
70 Views
0 Kudos
Beginner
47 Views

Thank you

0 Kudos