Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
20641 Discussions

MAX10 devices with 1.0V IO support

Pench
Employee
557 Views

Hi,

 

Can you clarify us the below queries list related to the MAX10:

 

  1. Is the 10M50DA484I6G device supports with the 1.0V IO?
  2. We are using the 10M50DA484I6G in our design. F484 package supports DDR3L memory devices?
  3. Is 10M50DA484C8G supports with both the1.0V IO and DDR3L memory devices?
6 Replies
AminT_Intel
Employee
532 Views

Hello,

 

1. Is the 10M50DA484I6G device supports with the 1.0V IO?

Yes (refer to page 6 of Max 10 GPIO)

 

2. We are using the 10M50DA484I6G in our design. F484 package supports DDR3L memory devices?

Yes. (refer to page 56 of Max 10 Device Datasheet)

 

3. Is 10M50DA484C8G supports with both the1.0V IO and DDR3L memory devices?

Yes. (design based on requirement from both documents)

 

Resources:

1. Max 10 GPIO User Guide: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/max-10/ug_m10_gpio.pdf

2. Max 10 Device Datasheet: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/max-10/m10_datasheet.pdf

 

Thank you.

Pench
Employee
518 Views

Hi,

 

As per the MAX10 GPIO page 6, 10M50DA484I6G not listed out and attached the screen shot for reference.

 

Let us know any comments here.

 

Thanks

Pench

0 Kudos
AminT_Intel
Employee
507 Views

Hello Pench,

 

Thanks for pointing that out! It seems like your particular device does not support 1.0 LVCMOS.

 

Thanks.

avm
Employee
499 Views

Hi Amin,

 

Thanks for the confirmation.

 

Kindly confirm again for the below query. Because in datasheet it is mentioned that only I6 grade supports the DDR3, DDR3L devices.

Attached screenshot for your reference.

Is 10M50DAF484C8G supports with both the1.0V IO and DDR3L memory devices?

avm_0-1624354604405.png

 

Thanks,

AVMeiyappan

0 Kudos
AminT_Intel
Employee
474 Views

Hello,

 

I apologize for my initial post I just noticed that you posted different OPNs. 

 

OPN 10M50DAF484C8G does not support DDR3L but does support 1.0 V LVCMOS.

 

Thanks.

AminT_Intel
Employee
441 Views

We do not receive any response from you to the previous question/reply/answer that I have provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.

0 Kudos
Reply