MAX10 "JTAG_Lock_Unlock" project

Programmable Devices

CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers

MAX10 "JTAG_Lock_Unlock" project

439 Views

I have unintentionally LOCK a chip 10M25DAF256C8G due to JTAG secure option and wrong key in POF file. In Intel site I have download "JTAG_Lock_Unlock" project to unlock my chip but I can NOT configure chip by .sof file and have an error:

(Error (209014): CONF_DONE pin failed to go high in device 1. Make sure all communication cables are securely connected, select a different device, check the power on the target system, or make sure all nCE pins are connected to GND. The Intel FPGA Knowledge Database contains many articles with specific details on how to resolve this error. Visit the Knowledge Database at https:// ... and search for this specific error message number.)

All jtag-signals are comming to chip but I can NOT configure .sof of "JTAG_Lock_Unlock" project. CAN YOU HELP ME TO SOLVE THIS PROBLEM.

Link Copied

0 Replies

Community support is provided Monday to Friday. Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.