Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
公告
FPGA community forums and blogs on community.intel.com are migrating to the new Altera Community and are read-only. For urgent support needs during this transition, please visit the FPGA Design Resources page or contact an Altera Authorized Distributor.
21615 讨论

Maxplus + Byteblaster not available

Andreas1980
初学者
1,286 次查看

HI,

 

I installed Maxplus2 10.2 full version on windows XP like I ever did, then the programmer drivers, then the windows drivers - add hardware - sound/gaming/... - have disk, win 2000 Byteblaster.

After a restart of the system, there was no Byteblaster2-Entry in Altera. Maybe I forgot something.

Thanks, Andreas

 

 

 

标签 (1)
0 项奖励
7 回复数
FvM
名誉分销商 II
1,240 次查看

Hi,
is it 32-Bit Windows XP? Byte Blaster driver doesn't run under 64-Bit OS.

0 项奖励
Andreas1980
初学者
1,195 次查看

HI,

yes, sure, it's 32 Bit XP. I bought many Notebooks with 32 Bit XP and installed the Programmer Driver, maxplus2+ and the windows2000 driver of byteblaster and selected byteblaster (Under Add hardware - sound/video/gaming - the driver is there) but I am facing the same erroor everywhere. That means I did something wrong, but I really don't know what (In my sence I did the same as allways). The problem is, that my old notebook with the correct setup is defect and I am not able to set up a new one. 

 

Please find the attached screenshots.

As you can see there is no Windows XP Professional 64 Bit, it's just Windows XP Professional and in Windows Device Manager you can see that the windows driver for Byteblaster is installed.

I also tried many different settings of the com port - it didn't work.

And in maxplus2 there is no hardware selected. On my last notebook there was Byteblaster II available under hardware setup. Is there any way to add byteblaster2 in maxplus2?

 

I have many systems running with my maxplus+ System. (FPGA)

I hope you can help me.

 

Thanks,

Andreas

0 项奖励
FvM
名誉分销商 II
1,179 次查看

Him,
unfortunately I don't have an active 32-Bit system with MAX+plus II running presently. And I'm not working with devices stuck to MAX+ since 20 years. I might be able to setup WinXP system for test.

Other question in the meantime, what kind of LPT port are you using?

Regards
Frank  

0 项奖励
Andreas1980
初学者
1,157 次查看

HI Frank,

 

it would be fine, if you could try this. I tried the setup on four notebooks with parallel ports: One Lenovo one IBM, one Fujitsu Siemens and one Roda.

Parallel Port config: I tried ECP, EPP, Standard bidirectional, Starting Addressses 0x278, 0x378, 3BC … Allways the same error on all notebooks.

 

Maybe it helps you when I thell you my configs:

All notebooks are Windows XP 32 and have a parallel port (RAM is between 2GB and 4GB).

From the orig CD:

First: I selected programer only

Second: I selected Full/Flexlm/… installieren

Then I told Windows that I have a Byteblaster:

Control Panel – Hardware – add new Hardware – is connected – Audio/Video/Gamingcontroller – Have disk – c:\maxplus2\drivers\win200

 

In MaxPlus+ I do the following:

File – open – the GDF-File

File – Project – set Project to current file

(Maybe File – Hirarchy Top before).

Maxplus2 – Compiler – Start – when ready:

Maxplus2 – Programmer

File – Select Programing File – (Select the pof file because the sof file doesn’t work).

And now back tot he programmer dialog. Select program on the left side – that’s I always did before, but now the program button on the left is grayed out becaulse of no hardware selected. And when I click on Options – Hardware setup – I can’t select byteblaster.

 

I have one colleague with one working notebook for this, but he is 2 car hours away.

He came to me and could connect to my programmer, select Byteblaster II and updated a program on my processor.

But 2 hours driving (one direction) is a long way and he also doesn’t have an idea what I did wrong.

The parallel port mode of my colleague is ECP, but I think on my old lenovo notebook I just had standard and selected the starting address of 0x278 or 0x378 – and this also worked well.

 

If you need anything from me, or I should try something, please tell me.

 

It would be very nice from you, if you could help me.

Thank you so much!

 

Regards,

Andreas

0 项奖励
Andreas1980
初学者
1,034 次查看

HI!

 

do you have any news for me?

 

regards,

Andreas

0 项奖励
NurAiman_M_Intel
885 次查看

Hi,


Below are the resource that we have for MAXplus II as it has been discontinued. We have limited resource for this.


https://www.intel.com/content/www/us/en/support/programmable/support-resources/download/dri-bb-xp.html


https://www.altera.com/support/support-resources/download/legacy/maxplus2/mp2-index.html 10.2 installer


You must have system administration (Administrator) privileges to install the ByteBlaster II, ByteBlasterMV, or ByteBlaster download cable drivers.


Regards,

Aiman



0 项奖励
NurAiman_M_Intel
794 次查看
  • As we do not receive any response from you on the previous question/reply/answer that we have provided. Please login to ‘ https://supporttickets.intel.com’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.



0 项奖励
回复