Not able to boot on newer Arria10 SoC boards

[sgannava]

Hi Team,

I have created a custom linux image that works fine and am able to boot the older Arria10 SoC Development kits. But, with the same linux image, the newer Arria10 SoC board (Rev C)) is not booting. Why is it happening so? Is there any difference between older and newer Arria10 SoC boards? I have attached the boot log as well.

[symmt_Intel]

Hi sgannava,

1. It seems the u-boot version is old. Have you tried newer one?
2. What is the rev of the older board?

I will look more closely at the log to see if there are any potential issues.

Best regards,

Sho Yamamoto

[sgannava]

Hi Sho Yamamoto, 

How can I check the rev of the board?

[sgannava]

The serial number of the board is 10ASXSoC003968

[symmt_Intel]

Hi sgannava,

Please refer to UG.

https://www.intel.com/content/www/us/en/docs/programmable/683227/current/soc-development-kit-overview.html

You can use board test system to get the revision.

What about the u-boot?

Have you tried the newer one?

Best regards,

Sho Yamamoto

[symmt_Intel]

Hi sgannava,

Please check the revision of the board and if both boards are installed with the same SDRAM.

Best regards,

Sho Yamamoto

[sgannava]

Hi Sho Yamamoto, 

Sorry for late reply. 

Details of the board with no booting issue

Serial Number: 10ASXSoC003452

Board Revision Rev C

Details of the board with boot issue

Serial Number: 10ASXSoC004564

Board Revision Rev C

I have not tried newer u-boot yet. Can you please direct me to the newer u-boot repo?

Thanks

Sai

[Waimenn]

Hi Sai,

We have posted the latest version of QPDS24.1 in RBO page. Can you please try the latest version, below is the page.

Arria 10 SoC GSRD | Documentation | RocketBoards.org

Regards,

Waimenn

[sgannava]

Yeah Sure Waimenn