Stratix 10 AX SOC Reference Design

[Toros]

Hi, 

Where can I find the SOC reference designs which are using ADC DAC for Stratix 10 AX?  Thanks and best regards 

[aikeu]

Hi Toros,

I only able to find documents guide but no reference design.

https://www.intel.com/content/www/us/en/docs/programmable/683612/20-4/adc-overview.html

Thanks.

Regards,

Aik Eu

[aikeu]

Hi Toros,

I will close this thread if no further question.

Thanks.

Regards,

Aik Eu

[Toros]

HI, 

Could you check Intel DSP specialist for the availability of Stratix 10 AX SOC reference design? The FPGA is available. The board is on sale on Digikey. Even for verifying the ADC/DAC loopback and Rf Front end, some kind design needs to be done by Intel Altera. 

[Toros]

Second, 

The link above is related with the low speed ADC. My question is related with High Speed ADC/DAC RF Front end. 

[aikeu]

Hi Toros,

I am checking with the team who has any further information related to your request.

I suggest you can refer to Digikey regarding your request.

Thanks.

Regards,

Aik Eu

[Toros]

Hi, What do you mean with Digikey? Digikey does not develop any reference design. 

[aikeu]

Hi Toros,

Can you consult Digikey if there is a FAE support on this board?

I will try to check on my side further at the mean time.

Thanks.

Regards,

Aik Eu

[aikeu]

Hi Toros,

Have you already purchased the board?

Thanks.

Regards,

Aik Eu

[Toros]

Hi, 

I do not understand How Digikey is related with my question. Digikey is selling the Intel Board not their board.  The board is developed by Intel. 

[aikeu]

Hi Toros,

When seeking more information regarding this board.

There should be no Stratix 10 AX board listed in Digikey. Are you interested only in buying the Dev kit?

Thanks.

Regards,

Aik Eu

[aikeu]

Hi Toros,

Any feedback from the previous comment?

Thanks.

Regards,

Aik Eu

[Toros]

Hi Aik Eu,

My question is that The reference design for intel Stratix 10 AX Board made by Intel. 

I spent time to find a polite way but had to spend a lot of time. I have no time. This is my thoughts. Please do not misunderstand. My objective is not to be rude:    (1)My question is not related with Digikey. (2)The board is made by Intel. (3)The reference design is made by Intel. (4)Digikey has no part at all in my question.(5) I am sorry but I would like to express my feelings that I am upset for coming to this unrelated state and while I am looking for an answer to my question desperately, I have to answer to the questions not related with the subject.  

Sorry. Lets focus on the subject :

I am looking for the reference design. I am not interested with the board at this point. I need to figure out the tool flow first.

Thanks and best regards,

[aikeu]

Hi Toros,

I am investigating further and try to identify the FAE support for this board in order to get further information regarding the reference design.

Part of the process is to know that have you already purchased the board?

Thanks.

Regards,

Aik Eu

[aikeu]

Hi Toros,

May I know any feedback from previous comment?

Thanks.

Regards,

Aik Eu

[aikeu]

Hi Toros,

We do not receive any response from you to the previous question/reply/answer that I have provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.

Thanks.

Regards,

Aik Eu