VCCIO_PIO on the agilex7 datasheet

[kikoss]

Hello 

about  Single-Ended I/O Standards Specifications on Agilex 7 : 

it mentioned on datasheet that VIN_H =  0.65 × VCCIO_PIO
https://www.intel.com/content/www/us/en/docs/programmable/683301/current/single-ended-i-o-standards-specifications.html

My question is about the VCCIO_PIO  value  : what's its value ? 

I am working on 3rd part board  . should I ask the vendor ? or its a value that i can set /view from Quartus prime tool ? 

Thx

Kikoss 

[NazrulNaim_Intel]

Hello,

Good day

Thank you for reaching out. I'm Nazrul Naim looking into your issue and allow me some time to look into your issue. I shall come back to you with findings.

Thank you for your patience.

Best Regards,

Nazrul Naim

[NazrulNaim_Intel · Accepted solution]

Hello,

Sorry for the delay. For your information the value of the VCCIO_PIO as stated in the table from the datasheet is 1.2V for I/O standard 1.2V LVCMOS.

Hope that answers your question and do let me know if I can assist you further.

Best regards,

Nazrul Naim

[kikoss]

Thank you for the infos 

[NazrulNaim_Intel]

Hello,

I’m glad that your question has been addressed, I now transition this thread to community support. If you have a new question, Please login to ‘https://supporttickets.intel.com’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.

If this does address your question, please take a moment to close this service request from your mySupport account and fill out the service evaluation survey. If you feel your support experience was excellent, please rate it with score of 10. If you feel your support experience was less than a 9 or 10, please allow me to correct it before closing or please let me know the cause so that I can improve your future support experience.

Best regards,

Nazrul Naim