Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
Announcements
All support for Intel NUC 7 - 13 systems has transitioned to ASUS. Read latest update.
20548 Discussions

how to drive USER_LED on max v 5m570 CPLD dev board

ez30
Beginner
828 Views

Hi, 

Just started to program CPLD for the first time. I saw from schematics USER_LED0 is tied to P4 and USER_LED1 is tired to R1.  So, in the pin assignment, I assign output to PIN_P4, and output is driven to GND. After programming, the LEDs are still on. anything missing? thanks

0 Kudos
3 Replies
NurAiman_M_Intel
Employee
809 Views

Hi,

 

Thank you for contacting Intel community.

 

Do you mean you refer to MAX V CPLD Dev board reference manual? Below table shows the description for the LED.  Driving a logic 1
on the I/O port turns off the LED.

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/manual/rm_maxv_cpld_dev_board.pdf

 

NurAiman_M_Intel_0-1624004427675.png

Regards,

Aiman

 

0 Kudos
ez30
Beginner
764 Views
0 Kudos
NurAiman_M_Intel
Employee
790 Views

We do not receive any response from you to the previous answer that I have provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.


0 Kudos
Reply