CREATING RAID 0 VOLUME

[WB2]

I am experiencing an issue with creating and booting from a RAID 0 volume on my Windows system. I have two SATA drives connected and recognized by my system. Initially, I attempted to create the RAID volume using the Intel Pane Memory and Storage Management app, but the "Next" button was not clickable, and I was unable to select RAID 0. I check my bios and my sata controller mode is on Intel RST mode.

[Mike_Intel]

Hello WB2,

Thank you for posting in Intel community Forum.

For us to further check this, please help provide the following details:

1. What is the brand and model of your system?
2. Can you also share the screenshots of your physical drive and logical drives?
3. Are you doing this inside the OS where there is an OS installed already?
4. You want to make a bootable drive RAID 0 when you already have an existing OS?

If you have questions, please let us know. Thank you.

Best regards,

Michael L.

Intel Customer Support Technician

[Mike_Intel]

Hello WB2,

I hope this message finds you well. 

Were you able to check the previous post?

Please let us know if you still need assistance.

Best regards,

Michael L.

Intel Customer Support Technician

[Mike_Intel]

Hello WB2,

I hope you are having a good day.

I am sending another follow up on the information that I requested. 

Since we have not heard back from you, I need to close this inquiry. 

If you need further assistance, please post a new question as this thread will no longer be monitored. 

Thank you and have a great day. 

Best regards,

Michael L.

Intel Customer Support Technician