Rapid Storage Technology
Intel® RST, RAID
2074 Discussions

F6flpy-x64-Non-VMD.zip and F6flpy-x64-VMD.zip Removed

PhilipYip
Novice
458,847 Views

There seems to have been an update to the Intel Rapid Storage Technology User Interface and Driver Downloads Page:

https://www.intel.co.uk/content/www/uk/en/download/19512/intel-rapid-storage-technology-driver-installation-software-with-intel-optane-memory-10th-and-11th-gen-platforms.html 

Now there is only the option to download the SetupRST.exe. Previously there was a F6flpy-x64-Non-VMD.zip and F6flpy-x64-VMD.zip. These are required to load the F6 drivers during the Windows Setup Screen and the zip format is particularly important when creating Windows Installation Media on another Operating System such as Ubuntu.

Labels (2)
31 Replies
BrijeshLadani
Beginner
360,092 Views

Those who Cant find VMD F6 driver

 

I extract RST.exe into zip

for that download attached file or follow  below link to download

https://drive.google.com/file/d/1lqCLrlqNV1Zrnkl1JjWvWIDMHCmd1S0z/view?usp=sharing

Cold_
Beginner
263,710 Views
0 Kudos
BrijeshLadani
Beginner
180,388 Views

Yes unzip this and put unzipped directory inside the bootable usb or different usb

 

Then install the windows if error occurred for driver not found then go to browse button on that error screen then browse your usb and select "VMD" directory from unzip data

 

0 Kudos
Pierre73460
Beginner
63,154 Views

Bonjour, 

Par pitié aidez moi, ça fais 2 jours je cherche ce fichier et une fois que je l'ai enfin trouvé cela ne fonctionne pas. 

Mon SSD n'est toujours pas détecté par l'installation de Windows. 

Auriez vous une solution à me suggérer ? 

 

Cdrlmt ,

Pierre.

0 Kudos
SetUp
Beginner
35,129 Views

Thanks A Lot! been battling with this for long , Across my experiences installing windows this surely gave me a headache, as i copied all the folders into the flash drive it automatically loads and boots with it without any error again, THANKS!!!!

0 Kudos
DrAmjad
Beginner
186,683 Views

The same can be created using cmd or windows power shell. Its described in the README.txt topic 6.3

0 Kudos
sudo64
Beginner
65,061 Views

Well i have finally found a driver that works, it might not work for all computers, but it worked for me, tell me if it works.

 

I'll also archive the driver in archive.org.

 

(You'll need 7zip to extract the driver.)

0 Kudos
ral619
Beginner
60,897 Views

excelente me funciono esto en este modelo de equipo HP Laptop 15-dy2074nr

 

0 Kudos
JAMESWT_MHT
Beginner
64,100 Views

Hello @PhilipYip 

Reference Page
https://www.intel.com/content/www/us/en/download/779369/intel-rapid-storage-technology-driver-for-windows-10-iot-enterprise-and-windows-11-for-intel-nuc-13-pro-kits-nuc13l3.html?wapkw=nuc%20rst%20floppy

Direct link
https://downloadmirror.intel.com/779370/RST-F6-19.5.2.1049.4.zip

Or take last RST driver and with powershell extract it
https://www.intel.com/content/www/us/en/support/articles/000094664/technologies/intel-rapid-storage-technology-intel-rst.html

Open the terminal in the directory with SetupRST.exe by right-clicking the directory and selecting Open in Terminal or Open PowerShell here. If the options for CMD or Powershell* are not enabled, find each one to proceed with step 2:
For Powershell:
Open a PowerShell* window as an administrator
Navigate to the location of SetupRST.exe file >PS c:\windows\system32> cd “c:\users\Intel\downloads\
For CMD:
Open a cmd window as an administrator.
Navigate to the location of SetupRST.exe file > c:\windows\system32> cd c:\users\Intel\downloads\
Enter the following command: ./SetupRST.exe -extractdrivers SetupRST_extracted.

 

0 Kudos
Hardwarespecialist
63,013 Views

But this shouldn't be a thing. 
On HP laptops with windows home. I am absolutely fricked without those drivers, no way to turn off vmd in the bios. no way. 
I've even had an HP representative tell me that i shouldn't need to disable vmd. 

All i can say is if you're buying a hp laptop and have to reload it. Good luck! I have even tried to load the drivers and sometimes they fail to load. 

So thanks INTEL. 

0 Kudos
DonPk
Beginner
23,923 Views
J'ai bien tapé les commandes que vous avez donné mais on me renvoie ce message
'.' n'est pas reconnu en tant que commande externe, interne
0 Kudos
Reply