Recover RAID 1 after failure

[#1]

I have an HP Elitedesk 800 with Intel Rapid store Technology.

The machine rebooted an now says no operating system.

There is a RAID 1 mirror with 2 1tb mechanical drives.  The array says it is in a "Failed" state.  But I removed the drives and connected them to another machine using an externally attached USB disk adapter.  Both drives showed the normal Windows booth disk folders.

I also ran the local hardware test on the Hp machine and both drive passed.  

The issue seems to be the ARRAY is corrupted, but not the disk.

How do I recover the system to a running machine?

Thanks in advance.

[DeividA_Intel]

Hello,  

Thank you for posting on the Intel® communities. I understand you are having issues with your laptop.

In order to better assist you, please provide the following:  

1. Can take pictures of the errors?

2. What is the BIOS version of your laptop?

3. Are you using this computer as a server?

4. What is the version of the Intel® Rapid Storage Technology (Intel® RST) tool and driver?

5. Are you able to see the disks at the BIOS?

Regards,  

Deivid A.  

Intel Customer Support Technician 

[DeividA_Intel]

Hello.

Were you able to check the previous post and get the information requested? Please let me know if you need more assistance.   

Regards,  

Deivid A.  

Intel Customer Support Technician  

[DeividA_Intel]

Hello, 

We have not heard back from you, so we will close this inquiry. If you need further assistance or if you have additional questions, please create a new thread and we will gladly assist you.  

Regards,  

Deivid A.  

Intel Customer Support Technician