HTML5 on S2600CWR with RMM4LITE2

[Trooper]

Checking to see if HTML5 for the BMC is supported with an RMM4LITE2 on a S2600CWR board.

The RMM4 notes seem to indicate it is.

It shows the board is supported and HTML5 is supported.

https://www.intel.com/content/dam/support/us/en/documents/server-products/rmm4-tps.pdf

But I also came across a forum post that says BIOS version 2.00 or above is required.

Which does not appear to be available for this board.

System Information:

Remote Management Module key:  Installed

Device (BMC) Available:  Yes

BMC FW Build Time:  2020-08-18 04:32:56

BIOS ID:  SE5C610.86B.01.01.1029.090220201031

BMC FW Rev:  1.61.12390

Boot FW Rev:  1.07

SDR Package Version:  SDR Package 1.15

Mgmt Engine (ME) FW Rev:  03.01.03.072

Board Information:

Manufacturing Date:  2017-04-28   15:40

Manufacturer:  Intel Corporation

Product Name:  S2600CWR

Part/Model Number:  H12881-271

FRU File ID:  FRU Ver 1.14

CPU Information:

Socket Designation:  CPU1

Manufacturer:  Intel(R) Corporation

Version:  Intel(R) Xeon(R) CPU E5-2680 v4 @ 2.40GHz

Thanks

[JoseH_Intel · Accepted solution]

Hello Trooper,

Thank you for joining the Intel community

What you state is correct. According to this article How to Access BMC Console Through iKVM over HTML5 (intel.com) the RMM4 is capable to access the BMC console through iKVM over HTML5 but it requires a BIOS version 2.0 or higher in order to become available. This board S2600CW is a previous generation board and no 2.0 BIOS version was ever released, and most likely it will never be. Unfortunately the only KVM console option for your board it is the java applet one.

Regards

Jose A.

Intel Customer Support Technician

For firmware updates and troubleshooting tips, visit:

https://intel.com/support/serverbios

[Trooper]

Jose

Thanks for the confirmation.

Not a huge deal.

This is just a lab server, but would be nice.

[RomKla]

Hey Trooper ,

Which Tool do you use to get this detailed Information above in your Mail from your Server ? 

-----------------------------------------------------------------------------"

System Information:

Remote Management Module key:  Installed

Device (BMC) Available:  Yes

BMC FW Build Time:  2020-08-18 04:32:56

BIOS ID:  SE5C610.86B.01.01.1029.090220201031

BMC FW Rev:  1.61.12390

Boot FW Rev:  1.07

SDR Package Version:  SDR Package 1.15

Mgmt Engine (ME) FW Rev:  03.01.03.072

Board Information:

Manufacturing Date:  2017-04-28   15:40

Manufacturer:  Intel Corporation

Product Name:  S2600CWR

Part/Model Number:  H12881-271

FRU File ID:  FRU Ver 1.14

CPU Information:

Socket Designation:  CPU1

Manufacturer:  Intel(R) Corporation

Version:  Intel(R) Xeon(R) CPU E5-2680 v4 @ 2.40GHz

----------------------------------------------------------------------------

Thanks very much an advance for help

Roman

[Trooper]

Hi Roman

I am not sure I understand your question.

I got that information from the RMM4 web page.

Your question asks about getting the information in my “Mail”.

There was no Mail involved.

I just copied the info from the web page.

Sorry - Maybe I am misunderstanding your question.

[RomKla]

Hi Trooper,

thanks very much for the Information.  That would be help. 

Kind reagards

Roman