Need a server similar to below

[idata]

Currently we have an Intel server that is about 5 years old with the following specs:

System  ModelWindows Server 2003 Standard Edition Service Pack 2 (build 3790) Intel Enclosure Type: Server ChassisProcessor  a Main Circuit Board  b3.00 gigahertz Intel Pentium 4 (2 installed)16 kilobyte primary memory cache1024 kilobyte secondary memory cache Board: Intel SE7520JR23D FRU Ver 0.01Serial Number: BZJR60100827Bus Clock: 800 megahertzBIOS: Intel Corporation SE7520JR23.86B.P.10.00.0087.120820051348 12/08/2005Drives Memory Modules  c,d

319.98 Gigabytes

Usable Hard Drive Capacity244.94 Gigabytes Hard Drive Free SpaceSlimtype COMBO SOSC-2483K [CD-ROM drive]MEGARAID LD 0 MEGARAID SCSI Disk Device (159.99 GB) -- drive 0MEGARAID LD 1 MEGARAID SCSI Disk Device (159.99 GB) -- drive 1 2048 Megabytes Installed MemorySlot 'DIMM 1A' has 1024 MBSlot 'DIMM 1B' has 1024 MBSlot 'DIMM 2A' is EmptySlot 'DIMM 2B' is EmptySlot 'DIMM 3A' is EmptySlot 'DIMM 3B' is Empty

.

What would be a compatible server that would have simiar specs? It would definitely need to have two fixed hard drives and 2 processors

[Edward_Z_Intel]

That server is at least 5~7 years old, and a lot have changed... Your server is a rack-optimized system. In current generation there are two rack-optimized server boards. Below is a quick comparison:

http://ark.intel.com/compare/61039,56253 http://ark.intel.com/compare/61039,56253

[AP16]

Do you have a requirement for WS2003 OS (32-bit i think) on it? Cause there are some troubles with old MS server OSes on latest server platforms, which may hurt sysadmin work by some. If you can upgrade to WS2008/R2, you should not encounter such quirks.