Solved: Re: S5000PSL SATA not seeing all 6 SATA drives

SHout · ‎02-03-2016

The S5000PSL bios is only showing 4 SATA drives. There are 6 SATA connectors on the board. All literature for this motherboard indicates 6 SATA available.

PATA is disabled. RAID is disabled.

Have 4 Seagate 2TB drives in connectors 2 through 5 but only seeing SATA 0 through 3.

Any help much appreciated.

idata · ‎02-11-2016

Hello,

We regret to inform you that the board you are looking support is end of interactive support (EOIS) but as a general recommendation check cables and the backplane you are using to connect the drives. Make sure you have the latest firmware from our website.

View solution in original post

Allan_J_Intel1 · ‎02-09-2016

I have moved your post to the appropriate support group:

Allan.

idata · ‎02-11-2016

Hello,

We regret to inform you that the board you are looking support is end of interactive support (EOIS) but as a general recommendation check cables and the backplane you are using to connect the drives. Make sure you have the latest firmware from our website.