- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have a new Intel R2312GZ4GCSAS server system with the optional RES2SV240 RAID expander card installed.This system comes with the RMS25CB080 hardware RAID module pre-installed.
When installing Windows 2008 R2 with SP1, after installing all chipset, NIC, RAID, and related drivers, I am still seeing an unknown device in Windows Device Manager. It is listed as "SAS Controller" See screenshot here http://screencast.com/t/GnyUbkCmu5 http://screencast.com/t/GnyUbkCmu5
Anyone know which driver I need to install for this?
Jason
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
It could be the onboard SW RAID. Based on your BIOS settings, you could try one the following drivers:
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21752&lang=eng Intel® RSTe AHCI & SCU Software RAID driver for Windows*https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20963&lang=eng C600 chipset ESRT2 RAID driver for Windows*Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
It could be the onboard SW RAID. Based on your BIOS settings, you could try one the following drivers:
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21752&lang=eng Intel® RSTe AHCI & SCU Software RAID driver for Windows*https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20963&lang=eng C600 chipset ESRT2 RAID driver for Windows*- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Page not found please try this:
working for me
Intel® RSTe AHCI & SCU Software RAID driver for Windows
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23257 https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23257
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You can also check in the BIOS and disable any onboard controllers not in use. That will usually get rid of the extra controller listed in Device Manager.
![](/skins/images/B7BA37F9CE4B52FF7CAE1FB0388839C8/responsive_peak/images/icon_anonymous_message.png)
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page