Dialogic (SR5.1.1 to dial out with gc_basic_call Model demo

[tedfh]

Hello,

We are trying to have gc_basic_call_model demo program from dialogic ( SR5.1.1 ) to dial out on our T-1 lines.

We are using a D480JCT-2T1 board ( Dual Span ) , we are also pretty sure our problem is with the configuration of GlobalCall and the demo itself, reason being we were able dial-out using ISDIAG another diagnostic tool provided in SR5.1.1

Following 3 questions

1.In the configuration file of gc_basic_call_model demo the first thing we need to know is which one of the three network protocols to use IE: ISDN, ICAPI, or PDK.

2.If indeed it is PDK what should we specify as the dialing protocol, PDK_us_mf_io ?

3.Also we would like to know how to configure our system for GlobalCall IE: exact procedure for installing the CDP, FCD and PCD files. We have also tried "PDKmanagerRegSetup" and manually editing PDK.cfg , but we have nothing telling us if the settings were accepted and forced.

P.S. All available documentation for GlobalCall API Demo Guide has been read.

Thank You

[Intel_Software_Netw1]

Please be aware that interactive assistance for Intel Dialogic products is not available through this forum, or via Intel Customer Support email.

For presales inquiries regarding Dialogic products, please visit http://www.intel.com/network/csp/sales/index.htm

For postsales technical support options for your Dialogic product, please visit http://www.intel.com/network/csp/programs/support.htm

Regards,

Lexi S.

IntelSoftware NetworkSupport

http://www.intel.com/software

Contact us

Message Edited by intel.software.network.support on 12-02-2005 08:34 PM