SMBus Programming

[mbcdev]

I am working on a project with a WinBond interface chip on an
Intel ICH4-M equipped motherboard where I need to both read to and write from a device on the SMBus. I used a product called HWDirect from EProtek that has helped me do all of my troubleshooting and basic research and development, but now I need to actually put code in place to do this SMBus access.

EProtek told me there is an Intel document that would help with this sort of work; could someone please point me in the right direction for this documentation and, hopefully, give me any relevant information regarding this sort of work accessing a device on the SMBus?

Thank you in advance!

Sincerely,
Marshall Cummings

[Intel_Software_Netw1]

Greetings from Intel Software Network Support.

This type of information is kept on the Intel Hardware Design web site: http://www.intel.com/design/

You may also find information at one or both of the following URLs:

http://www.intel.com/products/chipsets/

http://appzone.intel.com/literature/index.asp

If the information you seek is not posted to Intel's public web sites, we recommend going throughyour company'sIntel Representative to request the documentation, or through an Intel Authorized Distributor, listed at: www.intel.com/buy/

Regards,

Lexi S.

Intel Software Network Support

http://www.intel.com/software/

Contact us

Message Edited by intel.software.network.support on 11-15-2005 11:46 PM