Hi,
In GUI tool(amplxe-gui), I can get "GPU usage", "CPU and GPU Active", "GPU Active" and etc. on CPU/GPU Concurrency mode.
However, I can't get these information on command line tool(amplxe-cl).
How to use amplxe-cl to get "GPU usage", "CPU and GPU Active", "GPU Active" and etc. ?
here is my command and result:
./amplxe-cl -report summary -r /root/intel/amplxe/projects/test/r041cgc
CPU --- Parameter r041cgc ----------------- ------------------------------------- Name Intel(R) Processor code named Skylake Frequency 3000000203 Logical CPU Count 8 GPU --- Parameter r041cgc ------------------- ------------------------------------------------- Name Display controller: Intel Corporation Device 5912 Vendor Intel Corporation EU Count 24 Max EU Thread Count 7 Max Core Frequency 1000000000 Summary ------- Elapsed Time: 6.432 Paused Time: 0.0 CPU Time: 6.198 Average CPU Utilization: 1.191 CPI Rate: 0.596 Average DRAM Bandwidth ---------------------- Package Total, GB/sec:Self --------- ------------------ package_0 1.226 Event summary ------------- Hardware Event Type Hardware Event Count:Self Hardware Event Sample Count:Self Events Per Sample ---------------------------------- ------------------------- -------------------------------- ----------------- INST_RETIRED.ANY 34812000000 11604 3000000 CPU_CLK_UNHALTED.THREAD 20742000000 6914 3000000 CPU_CLK_UNHALTED.REF_TSC 18594000000 6198 3000000 CPU_CLK_UNHALTED.REF_XCLK 148804464 1488 100003 CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE 147704431 1477 100003 Uncore Event summary -------------------- Uncore Event Type Uncore Event Count:Self ------------------------ ----------------------- UNC_IMC_DRAM_DATA_READS 89380439 UNC_IMC_DRAM_DATA_WRITES 33807073 GPU Usage --------- GPU Engine GPU Time:Self ---------------- ------------- Render and GPGPU 0.198 amplxe: Executing actions 100 % done
vtune version: 2019 (build 570779)
Link Copied
