Community
cancel
Showing results for 
Search instead for 
Did you mean: 
AHsu32
Novice
205 Views

S10 PAC Power Measurements

Jump to solution

Hi there!

 

I have an OPAE design I'm running on the S10 PACs in vLab. I'm wondering what the best methodology for measuring the design's power is. I know there's this guide that details measuring A10 PAC power. However, I'm not sure if the calculations in the spreadsheet still hold for S10. Or if there is just a better way to measure PAC power now.

 

Thanks!

0 Kudos
1 Solution
JohnT_Intel
Employee
144 Views

Hi,

 

Please execute " sudo fpgainfo bmc" in order to get the information needed. You can get the BMC information from https://www.intel.com/content/www/us/en/programmable/documentation/bvk1543945927773.html#iuv15720541....

View solution in original post

3 Replies
JohnT_Intel
Employee
145 Views

Hi,

 

Please execute " sudo fpgainfo bmc" in order to get the information needed. You can get the BMC information from https://www.intel.com/content/www/us/en/programmable/documentation/bvk1543945927773.html#iuv15720541....

View solution in original post

AHsu32
Novice
144 Views

Hi John,

 

Unfortunately, I do not think I can execute that due to lack of sudoers permissions. I'm running on the Intel vLab academic compute cluster.

Thanks!

JohnT_Intel
Employee
144 Views

Your welcome. Please contact Intel vLab Academic Compute cluster to see if they are able to help you on this.

Reply