ARM Eeprom-Tool - I211

[SHan9]

Hello,

We have burned too many times MAC addresses to I211, and now we can't burn it in. Do you know how to burn again?

Thank you!

[CarlosAM_INTEL]

Hello, hss:

Thank you for contacting Intel Embedded Community.

The information that may help you is stated in the answers to the questions 2.14, 2.15, and 2.24; on pages 8 and 9 of the https://www.intel.com/content/dam/www/public/us/en/documents/faqs/ethernet-controller-i210-i211-faq.pdf Intel(R) Ethernet Controller I210/I211 Frequently Asked Questions [FAQs] document 335346.

We hope that this information may help you.

Best regards,

Carlos_A.

[SHan9]

Hello,Carlos A:

Thank you for your answer!But I cann't download the file 513655 and 348742 .Because I don't have permission，can you send the file to my e-mail?

My e-mail address is mailto:hansixiang520@sina.com hansixiang520@sina.com.

Thank you very much!

[CarlosAM_INTEL]

Hello, hss:

Thanks for your replies.

The https://cdrdv2.intel.com/v1/dl/getContent/513655 Intel Ethernet Controller I210 and I211- AT Production NVM Images document # 513655 and https://cdrdv2.intel.com/v1/dl/getContent/348742 Intel Network Connections Tools 23.0 PV LAN Software Tools document # 348742 can be downloaded when you are logged into your

Embedded Design Center (EDC) Privileged account. In order to request an upgrade from your Basic EDC account to Privileged, go to the following website:

https://www.intel.com/content/www/us/en/forms/design/contact-support.html

We hope that this information may help you to solve this situation.

Best regards,

Carlos_A.

[SHan9]

Hello,Carlos A:

My email was wrong in the previous post, below is my correct email address.

My e-mail address is mailto:hansixiang520@sina.com hansisi520@sina.com.

Thank you very much!