Embedded Connectivity
Intel network controllers, Firmware, and drivers support systems

I210 Flash Programming

SDeBr
Beginner
2,144 Views

Hello,

I am designing around the I210 and I have a question about programming the Flash and the internal NVM. It is my understanding that I need access to documents 348742 and 513655 to answer my question, but I am still waiting on privileged access and this design is time sensitive.

I am confident that by the time the board arrives I will have access to the documents, but I need to know now if there are any hardware considerations for programming? Can all of the programming for flash and internal NVM be accomplished over PCIe or are other interfaces required?

Thank you

Sam

0 Kudos
1 Reply
CarlosAM_INTEL
Moderator
978 Views

Hello, Sam_DeBruin:

Thank you for contacting the Intel Embedded Community.

The information that may help you is stated in sections 9 and 3.7.7.5, on pages 108, 109, from 579 to 617 of the http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/i210-ethernet-controller-datasheet.pdf Intel(R) Ethernet Controller I210 Datasheet document # 333016; also, the answers to the questions 2.14, 2.15, 2.23, and 2.25 on pages 8 and 9 of the http://www.intel.com/content/dam/www/public/us/en/documents/faqs/ethernet-controller-i210-i211-faq.pdf Intel(R) Ethernet Controller I210/I211 Frequently Asked Questions (FAQs) document 335346.

We hope that this information may help you.

Best regards,

Carlos_A.

0 Kudos
Reply