Embedded Connectivity
Intel network controllers, Firmware and drivers.
670 Discussions

Request for JTAG programming manual for Intel WGI210AT SLJXR device

KritikaAnand
Beginner
380 Views
Our customer requested programmable support for Intel WGI210AT SLJXR device. We need the JTAG programming manual for this device in order to proceed further.Please advice how to proceed further.
 
0 Kudos
6 Replies
Crisselle_Intel
Moderator
361 Views

Hello KritikaAnand,


Thank you for posting in Intel Ethernet Communities. 


Can you confirm if you are into designing or customizing your own board with Intel WGI210AT SLJXR? If you do, we may need to route this query to our embedded connectivity support for further assistance. 


Looking forward to your reply. 


We will follow up after 3 business days in case we don't hear from you.


Best regards,

Crisselle C.

Intel® Customer Support


KritikaAnand
Beginner
339 Views

Hello Team,

 
I am working as a Device Support Analyst in BPM Microsystem. We provide programmable devices and support to various devices having programmable memory. 
One of our customers SMART MODULAR TECHNOLOGIES, Sdn. Bhd. requested support for Intel WGI210AT SLJXR .
We need the JTAG programming spec to proceed further.
 
Thanks and Regards
Crisselle_Intel
Moderator
343 Views

Hello KritikaAnand,


Good day!


This is just a follow up to check if you received our initial response. If yes, please confirm if you are into designing or customizing your own board with Intel WGI210AT SLJXR as we may need to route this query to our embedded connectivity support for further assistance. 


Hoping to hear from you soon. 


Should there be no response from you, I’ll make sure to reach out after 3 business days.


Best regards,

Crisselle C.

Intel Customer Support


Crisselle_Intel
Moderator
330 Views

Hello KritikaAnand,


Thank you for the reply. 


Please allow us to further check which team would be best to assist you. Rest assured that we will give you an update as soon as possible but no later than 2-3 business days. 


Hoping for your kind patience. 


Best regards,

Crisselle C.

Intel Customer Support


Crisselle_Intel
Moderator
321 Views

Hello KritikaAnand,


Thank you for the patience on this matter.


Please be informed that this query will be best answered by our Embedded Connectivity Support team. We will help you to move this post to the designated team for further assistance. Please feel free to contact us if you need assistance from Ethernet support team.


Best regards,

Crisselle C.

Intel® Customer Support


Jaime_Lizarme
Moderator
302 Views

Hello @KritikaAnand ,

 

Thank you for contacting Intel Embedded Community.

 

As shown in section 14.1.1 JTAG Test Mode Description of the i210 Datasheet (Doc. # 333016); this ethernet controller includes a JTAG (TAP) port that is compliant with the IEEE standard 1149.1 - 2001 Edition. As JTAG is an open standard we don’t provide internal guidelines of how to program it (it can be found on external sources); however, it is specified support for the following JTAG instructions shown on Table 14-2. TAP Instructions:

 

* BYPASS

* EXTEST

* SAMPLE / PRELOAD

* IDCODE

* USERCODE

* HIGHZ

 

 

Best regards,

Jaime L.

Intel Customer Support Engineer

Reply