Embedded Intel Atom® Processors
Technological Conversations about Intel Atom® Hardware, Software, Firmware, Graphics
1164 Discussions

## How can I get the MTBF data of Denverton (C3308, C3508, C3558 and C3758)?

Novice
1,181 Views

1 Solution
Moderator
772 Views

Hello, @MPark​:

Thank you for contacting Intel Embedded Community.

​It is important to let you know that the Mean Time between Failure (MTBF) is simply the inverse of the failure rate for an exponential distribution while the Failure in Time (FIT) rate is 10^9 x failure rate

MTBF = 1/failure rate

Example:

If FIT = 15.1, then MTBF = 10^9/15.1 = 66225165

The FIT values can be found in the Production Release Qualification (PRQ) Report of each processor.

In case of the cited processors, you should request them by filling out the form stated at the following website:

Best regards,

Moderator
773 Views

Hello, @MPark​:

Thank you for contacting Intel Embedded Community.

​It is important to let you know that the Mean Time between Failure (MTBF) is simply the inverse of the failure rate for an exponential distribution while the Failure in Time (FIT) rate is 10^9 x failure rate

MTBF = 1/failure rate

Example:

If FIT = 15.1, then MTBF = 10^9/15.1 = 66225165

The FIT values can be found in the Production Release Qualification (PRQ) Report of each processor.

In case of the cited processors, you should request them by filling out the form stated at the following website: