Community
cancel
Showing results for 
Search instead for 
Did you mean: 
mredd
Beginner
2,023 Views

Gordon peak board is not booting up

Am trying to boot up the Gordon Peak board(product code:GPMRBBBCHSS3) in ELK(Emergency Linux Kernel) mode but it is not booting.

Below logs are showing whenever target is switched ON

abl-APL: rel.1636

CPU: BXTP-B1 [4C @ 1900MHz: premium SKU], ucode rev.1A; power-on reset

IPC config: R.<16 bytes> (10ms)

PCB # B08F: GR MRB (BMP fab.D, 4x16Gb); BM:0

MRC: [v0.56.16/89.7] FB OK: 8GB

CSE: send DID UMA @10000000, 33MB

CSE: FW 3.0.0.1124

CSE: boot dev # 2: SPI

PTT: Waiting for TPM to clear tpmidle ... Done.

auto-boot ...

image# 0 - mmcbootX: eMMC boot: No image [err=2:ACK]

image# 0 - mmc2:/iasImage: MMC: 0G, boot 0/0 [5.1 HS400 FW 3.5 4e 5/15]:

*** load err # -4

image# 1 - mmc1:/iasImage: *** load err # -4

image# 2 - ELK: copy ELK from SPI in 3701 ms

image # 3: enter CLI ...

>>>

It is copying ELK from SPI but it is not entering into ELK mode.

Is there any way to boot into ELK mode?

5 Replies
CarlosAM_INTEL
Moderator
377 Views

Hello, mounikareddy:

Thank you for contacting Intel Embedded Community.

In order to better understand this situation, could you please let us know the part number of the processor and chipset related to this consultation?

Please let us know the answer to this question.

Thanks for your cooperation.

Best regards,

Carlos_A.

mredd
Beginner
377 Views

Thanks for reply.

Actually i didn't get any information about processor and it contains the Apollo Lake (APL) System-on-a-Chip (SoC).

Regards

Mounika

CarlosAM_INTEL
Moderator
377 Views

Hello, mounikareddy:

Thanks for your reply.

The information that may help you is stated in section 4.0, on pages from 24 to 27 of the https://cdrd.intel.com/v1/dl/getContent/567191 Gordon Ridge - Modular Reference Board (MRB) Getting Started Guide document # 567191.

This document is classified as Intel confidential, which requires a CDNA between your company and Intel as well as a Privileged Resource & Design Center (RDC) account. It can be requested by filling out the form stated at the following website:

https://www-ssl.intel.com/content/www/us/en/forms/design/registration-privileged.html https://www-ssl.intel.com/content/www/us/en/forms/design/registration-privileged.html

We hope that this information may help you.

Best regards,

Carlos_A .

UniversalMotors
Beginner
253 Views

Hello.
Now this links not working and in the RDC I can't find this document. Can you help me find it?

CarlosAM_INTEL
Moderator
246 Views

Hello, @UniversalMotors:

Thank you for contacting Intel Embedded Community.

You should find the Gordon Peak - Reference Board Support Package (BSP) for Apollo Lake (APL-I) - Getting Started Guide document # 567191 when you are logged into your Resource and Design Center (RDC) privileged account on the following website:

https://cdrdv2.intel.com/v1/dl/getContent/567191

The RDC Account Support form is the channel to process your account update request or report any inconveniences with the provided website. It can be found at:

https://www.intel.com/content/www/us/en/forms/support/my-intel-sign-on-support.html

Best regards,

@CarlosAM_INTEL.

Reply