SCCM and i219-LM network driver

[aahme21]

Dear All,

I am trying to import the network driver of EliteDesk 800 G2 to our SCCM . the driver should be intel I219 LM but it shows in sccm after the importing as Intel I217-lm so when i PXE the machine it reach to the networking section and fail to continue the PXE .

Please note that i use winpe 3 , windows 7 x64 enterprise , latest drive from both Intel and HP

[idata]

Hi ahmedg149,

Thank you for contacting Intel. Do you have the filename of the driver that you tried to import?Sincerely, Sandy

[aahme21]

Dear Sandy,

I import the below 2 Inf files E1R62x64.inf and E1D62x64.INF

as i download the driver from HP site for this model from the below link

http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=7633279&swLangOid=8&swEnvOid=4060 http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=7633279&swLangOid=8&swEnvOid=4060

[idata]

Hi ahmedg149,

Thank you for your information.Upon checking our drivers, only e1d62x64 contains driver for the Intel(R) Ethernet Connection I219-LM. Anyway, I will attach both drivers so you may try our driver version.In case you still encounter same issue with our driver, please report the issue to HP* so they can help test the drivers.Sincerely, Sandy

[idata]

Hi ahmedg149,

Good day.I would like to check if you were able to deploy image to your systems. Hope you are able to fix the issue at the soonest.Sincerely, Sandy

[aahme21]

Hi Sandy,

I managed to sort out the issue by re-create a new WIM file for SCCM and import the NIC driver Intel(R) Ethernet Connection I217-LM version 12.13.17.7.

Sorry for the late response

[idata]

Hi ahmedg149,

Good day. Thank you for your reply and sharing your test results with us. Feel free to contact us again if you need our assistance in the future. Sincerely, Sandy