- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Guys,
I connected an custom VHDL Avalon MM Master with an Avalon MM Slave in Qsys. Both Master and Slave are identical except the address with. I tried multiple addresses from the master , but avmm_slave_memory_burst_0 will be always accessed. Which address has to be used by the master to access the Second Slave??It should be 0x30000 ?????? This should be a very easy task and I don't get it why it don't work. In attachment are also the interface settings . Like you see in the slave interface settings, the waveform is not showed because of error/warning. But I dont have any message... http://www.alteraforum.com/forum/attachment.php?attachmentid=11135&stc=1 http://www.alteraforum.com/forum/attachment.php?attachmentid=11136&stc=1 Thanks for helpLink Copied
0 Replies
![](/skins/images/7FC17B7B85029576C25F1E43CE255B51/responsive_peak/images/icon_anonymous_message.png)
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page