FPGA Intellectual Property
PCI Express*, Networking and Connectivity, Memory Interfaces, DSP IP, and Video IP
6545 Discussions

Need TSE reference Design

nome
Novice
1,918 Views

Hi,

I've spent a lot of time searching on Google and within the Intel community, but I couldn't find the Arria II GX FPGA Reference Design for TSE using the GXB Transceiver. In my case, I'm using Quartus 18.1.

The only reference design I found is AN633 for Arria II GX, but it seems to be problematic due to its outdated design for Quartus 9.1, and it's missing some IP components needed for Quartus 18.1.

Could you please assist us by sharing the TSE reference design for Quartus 18.1 on the FPGA Arria II GX?

Thank you.

Labels (1)
0 Kudos
10 Replies
ZiYing_Intel
Employee
1,863 Views

Hi,


Thanks for submitting the issue. Allow me have some time to look into the issue and I will get back to you with findings.


Best regards,

zying


0 Kudos
nome
Novice
1,852 Views
Hi
Thanks for your reply
i I'll waiting your reply
Thanks
nome
0 Kudos
ZiYing_Intel
Employee
1,851 Views

Hi nome,


May I know the OPN number and the quartus version 18.1 (standard or pro) ?


Best regards,

zying


0 Kudos
nome
Novice
1,783 Views

Hi ZiYing_Intel

Thanks your Reply

I am using Arria ii GX EP2AGX190FF35I3 obviously  We are not using Pro version . 

I an using Quartus Prime Version 18.1.1 build 646 04/11/2019 SJ  standard Edition.

 

Thanks 

Nome

0 Kudos
ZiYing_Intel
Employee
1,719 Views

Hi nome,

 

I can't find the exact opn triple speed ethernet example design for you but you may try refer link below as a reference https://www.intel.com/content/www/us/en/design-example/715131/arria-10-triple-speed-ethernet-and-native-phy-design-example.html

 

Best regards,

zying


0 Kudos
nome
Novice
1,689 Views

Hello

Thanks for your Reply 

 

As you share pervious post TSE Reference Design for Arria 10 . I try in Quartus 18.1 design I am getting warning below    TSE.jpg  

 

 

Thanks 

Nome

0 Kudos
ZiYing_Intel
Employee
1,660 Views

Hi Nome,

 

I send the .qar file here. Hope that this triple speed ethernet example design is useful to you.

 

Best regards,

zying

0 Kudos
nome
Novice
1,647 Views

Hi ZiYing_Intel,

 

Thank you for your informative post.

 

You mentioned the Arria 10 Reference Design, which includes IP for XCVR, PHY, and other components. However, it does not support IP in the Arria II GX FPGA.

If you happen to have a reference design for the Arria II GX with GXB transceivers, could you please share it with us?

Thanks,

Nome

0 Kudos
ZiYing_Intel
Employee
1,603 Views

Hi nome,

 

I still can't find the triple speed ethernet example that related to Arria II since the device that you use is too old. However, you also can try find the design example through the link below https://www.rocketboards.org/foswiki/Main/WebHome

 

Best regards,

zying


0 Kudos
ZiYing_Intel
Employee
1,503 Views

Hi nome,


Since the device that you are using is too old, we still can't found the tse example design that related to arria ll. I would suggest you to use a new device which now the tse example design that can support it. I am now close the case. If you have any issue after the case closed, please do feel free to submit another issue. There will have people reach out to you.


Best regards,

zying


0 Kudos
Reply