Regarding receiver detection logic in Arria10 Transceiver Native PHY

[SKuma36]

We are using Arria10 Transceiver PHY configured for 10Gbps data rate. The Transceiver configuration rules has been set to "PCS Direct" and the PMA configuration rules has been set to "BASIC". With this configuration, we would like to know how to enable the receiver detection logic. Kindly suggest.​

[CheePin_C_Intel]

Hi SKuma36,

As I understand it, you have some inquiries related to the receiver detection feature in the A10 XCVR. Please correct me if I am wrong, as I understand it, you are referring to the "Receiver Detection" feature as in the A10 XCVR PHY user guide -> "Table 181. Supported Features for PIPE Configurations". If yes, for your information, the receiver detection feature is only available with PIPE PHY but not Native PHY. Sorry for the inconvenience.

Please let me know if there is any concern. Thank you.

Best regards,

Chee Pin

[SKuma36]

Hello Chee Pin, Thanks for the response. Rgds, sunil