Signal input for Video LVDS SERDES Transmitter/Receiver

[Altera_Forum]

I am using the Video LVDS SERDES Transmitter/Receiver from Microtronix Inc. The output signals make good sense as they are pins that connect to a TFT display.  

 The input signals are just tx[27:0], this is for R(7..0), G(7..0), B(7..0), HSync, VSync, PClock, and Enable. What order should be these be in?  If anyone has the datasheet I would be most glad. The technical docs link at http://www.altera.com/products/ip/dsp/additional_functions_dsp/m-mtx-lvds-serdes.html gives a 404 response.  Thank you!! Steve

[Altera_Forum]

Please see user manual at this link. 

 http://www.microtronix.com/ip-cores/video-lvds-serdes-transmitter-receiver-ip-core  28-bits will go like this:  TX_OUT_A TX_OUT_B TX_OUT_C TX_OUT_D  [6-0] 7-bits each. And there is Input side:  RX_IN_A RX_IN_B RX_IN_C RX_IN_D  Regards-

[Altera_Forum]

Thank you, that is exactly what I needed!