- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I am bringing up communication between stratix iv fpga and ddr2 sdram. For that I have instantiated DDR2 SDRAM Controller with UNIFY using Quartus prime standard edition 16.0.
I want to simulate the example project first to understand various signal and according to document "https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_ddr_ddr2_sdram_hp.pdf" , I am supposed to get testbench/<>_example_top_tb.v and memory_model.v files.
But they are not there in generated files.
Am I missing something in the instantiation or UNIFY doesn't come with above files?
Any suggestion in this regard is very helpful.
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
As what I remember, for this old device, after you click on the generation, it will pop-up a window to ask you either want to generate the example design, you have to tick the option to generate example design then click ok. It only will generate the testbench file for you.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I was selectinge generate example design option, it only generates the example desing project but didn't generate the testbench or memory model.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi, Now I understand the reason. Since you are using UniPHY, so the document that you referring is incorrect. the document that you are using now is ALTMEMPHY which is obsolete.
The IP that you instantiate in the QII 16.0 is UniPHY which include in this document:
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/external-memory/emi_ip.pdf#page=406
For uniphy, after you generate the IP with example design, it will create a folder <variable>_example_design
You may refer to the uniphy documentation as above on how to use the design.
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page