tennm_iopll cannot be found by QuestaSim for simulation

[itanium_dioxide]

Hello,

I am attempting to simulate a design in QuestaSim. The design uses the altera_iopll IP.  However, in simulation, QuestaSim is looking for an embedded tennm_iopll IP that I cannot seem to find the location of in any simulation build output directory. It is referenced in the simulation's modelsim.ini, but there is no location bound to it. 

What is this IP, and where can I find it for use in QuestaSim?

[sstrell]

Are you using the Questa included with Quartus or standalone?  What device are you targeting?

Perhaps you didn't generate simulation files for the IP when you generated it: https://www.intel.com/content/www/us/en/docs/programmable/683870/25-1/siemens-eda-questasim-simulator-support-43743.html

[itanium_dioxide]

This is Questa standalone (will have to investigate the Quartus one later).

The IP simulation files were generated, but this tennm_iopll IP is internal to the generated IP that every Altera IP seems to just be a wrapper for ([ip]_[string of chars].ip module in the 1920 folder) and is missing from all my project files.

[RichardTanSY_Altera]

Have you did the Tools > Generate Simulator Setup Script for IP, in Quartus (check section 2.4. QuestaSim* Simulation Setup Script Example) and source it in QuestaSim (check section 2.5 Sourcing QuestaSim* Simulator Setup Scripts), in the user guide link provided by sstrell?

Regards,

Richard Tan

[RichardTanSY_Altera]

Any update on this?

Do you able to resolve the issue?

Regards,

Richard Tan

[RichardTanSY_Altera]

We noticed that we haven't received a response from you regarding the latest previous question/reply/answer, and will now transitioning your inquiry to our community support. We apologize for any inconvenience this may cause and we appreciate your understanding.

If you have any further questions or concerns, please don't hesitate to reach out. Please login to https://supporttickets.intel.com/s/?language=en_US, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.

The community users will be able to help you on your follow-up questions.

Thank you for reaching out to us!

Best Regards,

Richard Tan