Arria 10 SoC - Boot from SD Card

[fpga_2022]

hi，@EBERLAZARE_I_Intel，i do run "make generate_from_tcl" first。

i want to reply you， but，the reply button is not work。

[EBERLAZARE_I_Intel]

Hi,

Can you share your full design and I try them from my side?

[EBERLAZARE_I_Intel]

Hi,

If you still having issue with the reply button, can you attached the design in email along with this link, to my email: eber.lazareen.ignatius@intel.com

We may proceed with the communication there.

[EBERLAZARE_I_Intel]

Hi,

Update:

Case is solved via email:

• Why cannot run "make generate_from_tcl" and "make rbf" / "make sof" in https://rocketboards.org/foswiki/Documentation/BuildingBootloaderCycloneVAndArria10 :

Unfortunately above commands are not supported to be executed in WSL, only in Linux, you can install a Virtual Machine, and do the commands.

• How to convert sof to rbf:

https://www.intel.com/content/www/us/en/docs/programmable/683536/current/converting-the-programming-file.html

You can follow the split rbf steps above.

• When running "tools/mkimage -E -f board/altera/arria10-socdk/fit_spl_fpga.its fit_spl_fpga.itb" I get "sh: 1: dtc: not found"

To solve:

sudo apt-get install device-tree-compiler