Cannot run de1-soc_vip_demo on DE1-SoC board

Altera_Forum · ‎06-24-2014

Hi!

I have try to run de1-soc_vip_demo using (http://www.terasic.com.tw/cgi-bin/page/archive.pl?language=english&categoryno=205&no=836&partno=5) quick run batch \de1-soc_vip_demo\quickfile\demo_batch\test.bat

And get following errors:

Info: *******************************************************************
Info: Running Quartus II 32-bit Programmer
    Info: Version 13.1.0 Build 162 10/23/2013 SJ Full Version
    Info: Copyright (C) 1991-2013 Altera Corporation. All rights reserved.
    Info: Your use of Altera Corporation's design tools, logic functions
    Info: and other software and tools, and its AMPP partner logic
    Info: functions, and any output files from any of the foregoing
    Info: (including device programming or simulation files), and any
    Info: associated documentation or information are expressly subject
    Info: to the terms and conditions of the Altera Program License
    Info: Subscription Agreement, Altera MegaCore Function License
    Info: Agreement, or other applicable license agreement, including,
    Info: without limitation, that your use is for the sole purpose of
    Info: programming logic devices manufactured by Altera and sold by
    Info: Altera or its authorized distributors.  Please refer to the
    Info: applicable agreement for further details.
    Info: Processing started: Wed Jun 25 00:56:01 2014
Info: Command: quartus_pgm -m jtag -c 1 -o p;DE1_SOC_golden_top.sof@1
Info (213045): Using programming cable "DE-SoC "
Info (213011): Using programming file DE1_SOC_golden_top.sof with checksum 0x024
F7934 for device 5CSEMA5F31@1
Info (209060): Started Programmer operation at Wed Jun 25 00:56:03 2014
Error (209015): Can't configure device. Expected JTAG ID code 0x02D120DD for dev
ice 1, but found JTAG ID code 0x4BA00477.
Error (209012): Operation failed
Info (209061): Ended Programmer operation at Wed Jun 25 00:56:03 2014
Error: Quartus II 32-bit Programmer was unsuccessful. 2 errors, 0 warnings
    Error: Peak virtual memory: 205 megabytes
    Error: Processing ended: Wed Jun 25 00:56:03 2014
    Error: Elapsed time: 00:00:02
    Error: Total CPU time (on all processors): 00:00:02

I use Quartus 13.1. The same quick run batch from DE1-SOC_V.3.0.0_SystemCD runs successfully, no problems with it.

Grateful for any help, thanks!

https://www.alteraforum.com/forum/attachment.php?attachmentid=9032