FPGA, SoC, And CPLD Boards And Kits
FPGA Evaluation and Development Kits
Announcements
Intel Support hours are Monday-Fridays, 8am-5pm PST, except Holidays. Thanks to our community members who provide support during our down time or before we get to your questions. We appreciate you!

Need Forum Guidance? Click here
Search our FPGA Knowledge Articles here.
5286 Discussions

DE10-Lite Control Panel Install

Altera_Forum
Honored Contributor II
2,752 Views

Terasic support provided the following files ( http://mail.terasic.com.cn/~jmlei/de10-lite/de10_lite_controlpanel_v101.zip) and procedure to install the DE10_Lite_ControlPanel on Windows 10 64 bits, and I have successfully used these files and procedure to install. (Email support if you are concerned about the use of the files, Mandy from Terasic support said it was okay to share the link) 

 

1) Install Quartus (make sure to configure the usb driver after the install) 

2) In the provided zip file, drag/create the bin32 directory to the quartus folder, in my case this was: C:\intelFPGA_lite\16.1\quartus\bin32 

3) I copied the Remaining files from the zip file into the same bin file, so the final bin32 folder is as follows: 

http://www.alteraforum.com/forum/attachment.php?attachmentid=13126&stc=1  

Let me know if you have success.
0 Kudos
1 Reply
Altera_Forum
Honored Contributor II
1,294 Views

Thanks for sharing this :)

Reply