How to solve that Error?

[RMEJD]

i have DE2 (University Program) Cyclone 2 (EP2C35F672C6N) and Quartus II 64Bit 13.0.

I creat a small Qsys_Project, which consists of (Clock, Nois II/f, Jtag, Timer, PIO and VIC), when i generated it , i get five Warnings:

Qsys Warnings:

Warning: Verilog HDL or VHDL warning at altera_vic_csr.sv(159): object "DcInValid" assigned a value but never read

Warning: Verilog HDL or VHDL warning at altera_vic_csr.sv(160): object "DcInData" assigned a value but never read

Warning: Verilog HDL or VHDL warning at altera_vic_csr.sv(165): object "DcRrsValue" assigned a value but never read

Warning: Verilog HDL or VHDL warning at altera_vic_csr.sv(166): object "DcNmiValue" assigned a value but never read

Warning: Verilog HDL or VHDL warning at altera_vic_csr.sv(168): object "DcRilAdjust" assigned a value but never read

Eclips Error:

run as Nois II Hardware --> Downloading ELF Process Failed

when i use Nois II/e in stead of Nois II/f , i have eny Error.

[Vicky1]

Hi,

For Nois II/f requires valid license, Do you have license for it?

'when i use Nois II/e in stead of Nois II/f , i have eny Error.'

what do you mean?

Refer the below link,

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/tt/tt_my_first_nios_sw.pdf

Let me know if this has helped resolve the issue you are facing or if you need any further assistance.

Best Regards

Vikas Jathar 

(This message was posted on behalf of Intel Corporation)

[Ahmed_H_Intel1]

I've created the same system you want with no warnings,

Can you please provide more screen shoots

[Ahmed_H_Intel1]

posted a file.

[RMEJD]

Hi,

1. 'when i use Nois II/e in stead of Nois II/f , i have eny Error.'

• when i use Qsys( Clk, Nois II/e, On Chip, Jtag, Timer and PIO) in stead of ( Clk, Nois II/f, On Chip, Jtag, Timer, PIO and VIC) , i don't get Warnings and Eclipse run well "Hello from Nios II".

1. 2 For Nois II/f requires valid license, Do you have license for it?

• i don't have license for Nois II/f, but my experience about Cyclone V Quartus 16.0 , i can use above-named Qsys_Project ( Clk, Nois II/f, On Chip, Jtag, Timer and PIO) without Warnings

tow Files are posted :

Screenshot_1 :--> Qsys_Project

Screenshot_2: --> Warnings

Best Regards

Rabii Mejdoule Semlali

[RMEJD]

posted a file.

[Ahmed_H_Intel1]

The NIOS II/f requires a license, Can you confirm If you have? As you see I did the same design in few seconds with no errors. It is a license issue.