I am trying to setup the softwares to run Intel FPGA SDK for OpenCL, my FPGA board is "Arria 10 GX FPGA Development Kit". Now I only have Quartus II 13.1 installed. Do I have to buy a newer version Quartus II?

[CalvinJoaz_P_Intel]

Hi Sjion, 

Arria 10 series only supports in Quartus Prime Pro Edition and Quartus Prime Standard Edition. 

For 'Intel FPGA SDK for OpenCL' development tools no additional licenses are required, it's supported with both Intel Quartus Prime Pro/Standard Edition software.

Kindly refer 'Compare between Intel Quartus Editions' link below.

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/po/ss-quartus-comparison.pdf

https://www.intel.com/content/www/us/en/programmable/support/support-resources/support-centers/licensing.html

Refer 'Download Center For Intel FPGA's' link below. 

It is always advisable to download the latest 'Select release:18.1'.

http://fpgasoftware.intel.com/18.1/?edition=standard&download_manager=dlm3&platform=windows

Let me know if you need any further assistance.

Thank you. 

[sjion]

Hi Calvin,

Thank you for your reply.

But I cannot afford a ​Quartus Prime Pro/Standard license now.

I saw my Quartus II 13.1 supports Cyclone V devices, can I run OpenCL with a DE10-Standard board on Quartus II 13.1?

And ​Quartus Prime Lite edition doesn't support Intel FPGA SDK for OpenCL, right?

Thank you again.

[CalvinJoaz_P_Intel]

Hi Sjion, 

Yes, Quartus II 13.1 supports Cyclone V devices also Additional Software 'Altera SDK for OpenCL'.

Yes, Quartus Prime Lite edition doesn't support Intel FPGA SDK for OpenCL.

Kindly check the link below which I provided earlier.

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/po/ss-quartus-comparison.pdf

Thank you.