FPGA, SoC, And CPLD Boards And Kits
FPGA Evaluation and Development Kits
Announcements
All support for Intel NUC 7 - 13 systems has transitioned to ASUS. Read latest update.
5842 Discussions

Is there a reference design of the displayport IP Intel running on A10GX development kit board and using the TX DP interface on the board ?

BLeLu
Beginner
602 Views
 
0 Kudos
3 Replies
Deshi_Intel
Moderator
364 Views
hi, you can refer to the Arria 10 TX only display port reference design in below link https://fpgacloud.intel.com/devstore/platform/18.1.0/Pro/intel-arria-10-displayport-tx-only-design/ Thanks. Regards, dlim
0 Kudos
BLeLu
Beginner
364 Views

Thanks for this answer.

But This design uses the Bitec FMC daughter card to transmit the video output.

We target to use the on-board (J5) DP interface, is it possible with the same reference design ?

 

Regards

0 Kudos
Deshi_Intel
Moderator
364 Views
Hi Blelu, Sorry, the reference design is targeted with Bitec FMC daughter card only. You will need to modify the design yourself if you plan to use on board DP interface. Thanks. Regards, dlim
0 Kudos
Reply