Hi All,My company is releasing two Cyclone IV E Dev boards, and a module system. I wanted to put links he for your information. *Disclaimer* Yes, I'm flogging a product, but I'm hoping to get feedback and I feel they are good enough that you should know about them. *End Disclaimer*. We're taking pre-orders on Crowd Funding Site IndieGoGo here: http://www.indiegogo.com/projects/helix-4-the-fpga-module-for-everyone/x/3703559. Please have a look. 1) The helix_4 module - EP4CE22 or EP4CE10, 'L' 1.0V Core versions available - 512kbit 10ns SRAM - 512mbits 16wide DDR2 - EPCS16 - 50MHz osc - Atmel ATSHA204 crypto IC - All power supplies - All variants <$60 - The idea is you build a cheap, quick 2 layer board with application circuits, and drop one of these puppies in, instead of copying yet another reference design. http://www.thin-layer-embedded.com/file/view/corner_view_sharp_480w.jpg/422663264/corner_view_sharp_... 2) The 'Goldilocks' Board, 1x helix_4 module + 3x Arduino Uno Shields Sockets - There are 300 Uno Shields out there (shieldlist.org) - Just drop any shield you want to give it the personality you need for your project - heaps of support on our support wiki here: http://www.thin-layer-embedded.com/module+-+helix_4 - This pic has 10W hdrs for programming, but next gen will have embedded programming circuits. - $175. http://www.thin-layer-embedded.com/file/view/rev_d_ms_with_shields_800w.jpg/439347644/rev_d_ms_with_... 3) The 'Breadstick' - A dev board for a breadboard - EP4CE10 sized module, no DDR2 - 33x 3.3V IO, 10x 5V IO with ADC/DAC capability - one socket for a Uno Shield http://www.thin-layer-embedded.com/file/view/Breadstick_in_hand_800w.jpg/440738226/Breadstick_in_han... Damn my hand is sexy... What do you think? Hot or not. If you like it, please support our campaign - please hit the like button, it gets us toward the front page of IGG. Thanks, Brent.