Pin Compatibility

[UMall1]

Is there any pin compatibility between the various FPGAs in the Stratix 10 SX and Agilex F series FPGA families. For example, as a design matures and needs more resources is there a clear replacement part available with more resources for a design?

[AqidAyman_Intel]

Do you mean you want a direct migration and compatibility from Stratix 10 SX to Agilex 7 F-Series?

[UMall1]

Yes. Stratix 10 SX and Agilex 7 F-series or Agilex 5 D-series?

[sstrell]

There used to be charts with up and down arrows that showed possible migration paths, but I haven't seen those for a while.  Probably the easiest way to get this info now would be in Quartus by attempting to add migration device(s) to a design (Assignments menu -> Device -> Migration Devices).  Unfortunately, this only shows part numbers, not device properties, so you'd have to go to the part number translator to understand what capabilities a supported migration device has.

Once you've added a migration device, pin assignments in the Pin Planner follow the placement rules for both the current device and any migration device(s) ensuring the placements are valid for both.