Graphics
Intel® graphics drivers and software, compatibility, troubleshooting, performance, and optimization
Ankündigungen
FPGA community forums and blogs on community.intel.com are migrating to the new Altera Community and are read-only. For urgent support needs during this transition, please visit the FPGA Design Resources page or contact an Altera Authorized Distributor.
22772 Diskussionen

NPU driver finishes OK but Error 1000 is reported

PhugoidEffect
Anfänger
45.368Aufrufe

Like described in the subject, the end of the installation is reported as successful, but Driver & Support Assistant lists as "Installation failed with error code 1000" 

Tried twice, same outcome.

1 Lösung
PhugoidEffect
Anfänger
11.305Aufrufe
None of these worked. It's pretty obvious it was just a status error, the driver was correctly installed on the first try, but the reporting software wasn't correctly signaled.
In any event, I just followed someone's suggestion to ignore that specific driver and it somewhat solved the issue.

Lösung in ursprünglichem Beitrag anzeigen

67 Antworten
Andre46
Einsteiger
33.927Aufrufe

I have the same problem.

Device Managemant screen

Intel Corporation   /    3-7-2025   /    32.0.100.4181

-------------------------------------------------------------------

Intel driver & support History screen:

Intel NPU Driver - Windows

Installation failed with error code 1000

 

Description:
This download installs Intel® NPU Driver - Windows* 32.0.100.4181 for Intel® Core™ Ultra processors.
Version:
32.0.100. 4181
Release date:
July 23, 2025
Size:
117.58 MB
 
 
 
Regard, Andre
LT7879
Neuer Beitragender I
33.900Aufrufe

I have the same problem too.

Anubis
Einsteiger
33.871Aufrufe

same to me, err code 1000

MPG Z890I EDGE TI WIFI (MS-7E33)

285K

any soloution?

MarcoAuday
Anfänger
33.776Aufrufe

Today, 2025-07-24, I installed the new Intel NPU Driver but it produces error code 1000 immediately after my computer reboots. I tried reinstalling one more time with the same result. Also, the Intel Driver and Support Assistant keeps flagging the NPU as not installed.

My computer has an Intel Core Ultra 9 285k processor, ASUS ROG Maximus Apex Z890 motherboard, and I am running the latest Windows 11 with all the most recent updates applied.

About a week ago I was prompted to install the previous version of the NPU Driver and it was successfully installed the first time I tried.

skypjack
Einsteiger
33.634Aufrufe

Same error. 285k on a MSI z890 tomahawk. Running latest and fully updated W11.

Tried to install, reinstall and clean install it. Nothing works apparently.

Frank90
Anfänger
33.456Aufrufe

Same error on ASUS ROG Strix Scar 18 with Intel Core Ultra 9 275HX. The issue is very wird, because the driver is already installed, but the manager says no.

Frank90_0-1753384932537.png

And the updater points to the exact same version.

Frank90_1-1753384989578.png

So here we are:

Frank90_2-1753385033792.png

4 failures (1000 and 1006 error codes) for a driver that is installed in my OS, and the updater trying to install the exact same version into an infinite loop.

PD: Version 32.0.100.4082 had no issues when installing.

 

Passegua
Anfänger
33.420Aufrufe

Same problem, installed repaired three times. Same error

JedG_Intel
Moderator
32.999Aufrufe

Hello PhugoidEffect,

 

Thank you for posting on Intel Community Forum.

 

It appears that you're having installation issues on NPU driver with Intel Driver & Support Assistant. To further troubleshoot the issue, kindly try to download the driver manually here -Intel® NPU Driver - Windows*

 

If you continue to observe the same issue, please let me know so we can further investigate.

 

Best regards

Jed G.

Intel Customer Support Technician


Dietmar-Po
Neuer Beitragender I
32.974Aufrufe

I did that already without success. In addition I have removed all NPU drivers, installed npu_win_32.0.100.4082 and the new version afterwards, without success. 

 

Frank90
Anfänger
32.770Aufrufe

Hello JedG_Intel. The driver is installed successfully (downloading the installer or using the assistant), but the assistant says the opposite. Please take a look at this:

Frank90_0-1753437870943.png

 

As you can see, my PC already has the version 32.0.100.4181, but the assistant says that the installation fails:

Frank90_1-1753438026443.png

And it also points to update it to the exact same version:

Frank90_2-1753438084778.png

So, if it's installed, the issue is with the support assistant that cannot recognize the installed driver, or the driver is corrupt (i don't put my money on this).



MarcoAuday
Anfänger
32.760Aufrufe

Hi Jed G,

I downloaded the driver from the Intel website and manually installed it with the same result. Not knowing how important this driver is for the proper functioning of my computer I also downloaded the previous version (4082). After (4181) manual installation failed I manually forced the installation of (4082) and it was successful.

By the way, both failed installations of (4181) also generated messages in the Windows Events viewer:

Kernel-EventTracing, event ID: 2, Session "WindowsUpdate_trace_log" failed to start with the following error: 0xC0000035.

Hope this helps you solve this problem.

PhugoidEffect
Anfänger
32.746Aufrufe
Hello Jed,
Just like everyone else have reported, I have the very same issues. This is clearly a problem within the verification of the Assistant. The driver is installed just fine, a proof of that is the fact that when we try to reinstall, the installer detects it as Repair installation. Please advise the developers to take a look at the routine that verifies whether or not the installation has succeeded.
Thank you for your kind support.
SJH1016
Anfänger
32.696Aufrufe

Downloaded the driver manually and still get error 1000 message (tried with a clean installation too).

Passegua
Anfänger
32.334Aufrufe

Hi, I'm having the same problem. I hope Intel fixes it soon. I can't wait!

JohnnieBG
Anfänger
31.042Aufrufe

I'm suffering this error too.  It's very obviously a bug in this version as many people are suffering the same issue with many different configurations.

 

Please fix it for us!!!

BangIw
Einsteiger
29.704Aufrufe

Driver Intel® NPU - Windows*

Installation failed with error code 1000

have try in manual or automatic aplication on my ideapad 5 pro ultra 9 185H
tommyr87
Einsteiger
32.723Aufrufe

Glad I'm not the only one. I'm thinking my armor software was blocking it. Driving me crazy.

GMizusawa
Einsteiger
32.684Aufrufe

Same problem as all others.

 

Both install methods result in Error 1006 or 1000 with ISDA reporting new driver available afterwards. Device manager indicates the driver was successfully updated.

 

Reinstall attempts permit "Repair" which indicates successful repair, only for the problem repeat.

 

ASUS Vivobook Pro 15 N6506MJ_Q543MJ +  Intel Core Ultra 9 185H

 

GMizusawa_0-1753444236411.png

GMizusawa_1-1753444288800.png

Sitearm
Einsteiger
30.921Aufrufe

ditto result: driver details show driver present

ditto result: assistant keeps telling me I need to install (again)

ditto result: install program shows "repair"

ditto diagnosis from my POV: it is dsa failure to recognize completed install

gear: surrface pro 11 intel edition

functional impact: to be honest I have NO idea yet what an npu driver is supposed to be doing for me but I am trying to learn

 

 

webkostas
Einsteiger
32.578Aufrufe

Hello, same error here. I noticed that when I was trying (repeatedly) to install the drivers, there was the following msg. Of course, there was no other installation going on, and I restarted numerous times too. It seems there is a generic issue/bug with those drivers. Let's hope they will solve and update soon.



webkostas_0-1753451186044.png

 

Antworten