Graphics
Intel® graphics drivers and software, compatibility, troubleshooting, performance, and optimization
22657 Discussions

NPU driver finishes OK but Error 1000 is reported

PhugoidEffect
Novice
43,474 Views

Like described in the subject, the end of the installation is reported as successful, but Driver & Support Assistant lists as "Installation failed with error code 1000" 

Tried twice, same outcome.

1 Solution
PhugoidEffect
Novice
9,411 Views
None of these worked. It's pretty obvious it was just a status error, the driver was correctly installed on the first try, but the reporting software wasn't correctly signaled.
In any event, I just followed someone's suggestion to ignore that specific driver and it somewhat solved the issue.

View solution in original post

0 Kudos
67 Replies
Andre46
Beginner
33,220 Views

I have the same problem.

Device Managemant screen

Intel Corporation   /    3-7-2025   /    32.0.100.4181

-------------------------------------------------------------------

Intel driver & support History screen:

Intel NPU Driver - Windows

Installation failed with error code 1000

 

Description:
This download installs Intel® NPU Driver - Windows* 32.0.100.4181 for Intel® Core™ Ultra processors.
Version:
32.0.100. 4181
Release date:
July 23, 2025
Size:
117.58 MB
 
 
 
Regard, Andre
LT7879
New Contributor I
33,193 Views

I have the same problem too.

Anubis
Beginner
33,164 Views

same to me, err code 1000

MPG Z890I EDGE TI WIFI (MS-7E33)

285K

any soloution?

MarcoAuday
Novice
33,069 Views

Today, 2025-07-24, I installed the new Intel NPU Driver but it produces error code 1000 immediately after my computer reboots. I tried reinstalling one more time with the same result. Also, the Intel Driver and Support Assistant keeps flagging the NPU as not installed.

My computer has an Intel Core Ultra 9 285k processor, ASUS ROG Maximus Apex Z890 motherboard, and I am running the latest Windows 11 with all the most recent updates applied.

About a week ago I was prompted to install the previous version of the NPU Driver and it was successfully installed the first time I tried.

skypjack
Beginner
32,927 Views

Same error. 285k on a MSI z890 tomahawk. Running latest and fully updated W11.

Tried to install, reinstall and clean install it. Nothing works apparently.

Frank90
Novice
32,749 Views

Same error on ASUS ROG Strix Scar 18 with Intel Core Ultra 9 275HX. The issue is very wird, because the driver is already installed, but the manager says no.

Frank90_0-1753384932537.png

And the updater points to the exact same version.

Frank90_1-1753384989578.png

So here we are:

Frank90_2-1753385033792.png

4 failures (1000 and 1006 error codes) for a driver that is installed in my OS, and the updater trying to install the exact same version into an infinite loop.

PD: Version 32.0.100.4082 had no issues when installing.

 

Passegua
Novice
32,713 Views

Same problem, installed repaired three times. Same error

JedG_Intel
Moderator
32,292 Views

Hello PhugoidEffect,

 

Thank you for posting on Intel Community Forum.

 

It appears that you're having installation issues on NPU driver with Intel Driver & Support Assistant. To further troubleshoot the issue, kindly try to download the driver manually here -Intel® NPU Driver - Windows*

 

If you continue to observe the same issue, please let me know so we can further investigate.

 

Best regards

Jed G.

Intel Customer Support Technician


0 Kudos
Dietmar-Po
New Contributor I
32,267 Views

I did that already without success. In addition I have removed all NPU drivers, installed npu_win_32.0.100.4082 and the new version afterwards, without success. 

 

0 Kudos
Frank90
Novice
32,063 Views

Hello JedG_Intel. The driver is installed successfully (downloading the installer or using the assistant), but the assistant says the opposite. Please take a look at this:

Frank90_0-1753437870943.png

 

As you can see, my PC already has the version 32.0.100.4181, but the assistant says that the installation fails:

Frank90_1-1753438026443.png

And it also points to update it to the exact same version:

Frank90_2-1753438084778.png

So, if it's installed, the issue is with the support assistant that cannot recognize the installed driver, or the driver is corrupt (i don't put my money on this).



MarcoAuday
Novice
32,053 Views

Hi Jed G,

I downloaded the driver from the Intel website and manually installed it with the same result. Not knowing how important this driver is for the proper functioning of my computer I also downloaded the previous version (4082). After (4181) manual installation failed I manually forced the installation of (4082) and it was successful.

By the way, both failed installations of (4181) also generated messages in the Windows Events viewer:

Kernel-EventTracing, event ID: 2, Session "WindowsUpdate_trace_log" failed to start with the following error: 0xC0000035.

Hope this helps you solve this problem.

0 Kudos
PhugoidEffect
Novice
32,039 Views
Hello Jed,
Just like everyone else have reported, I have the very same issues. This is clearly a problem within the verification of the Assistant. The driver is installed just fine, a proof of that is the fact that when we try to reinstall, the installer detects it as Repair installation. Please advise the developers to take a look at the routine that verifies whether or not the installation has succeeded.
Thank you for your kind support.
SJH1016
Novice
31,989 Views

Downloaded the driver manually and still get error 1000 message (tried with a clean installation too).

0 Kudos
Passegua
Novice
31,627 Views

Hi, I'm having the same problem. I hope Intel fixes it soon. I can't wait!

0 Kudos
JohnnieBG
Novice
30,335 Views

I'm suffering this error too.  It's very obviously a bug in this version as many people are suffering the same issue with many different configurations.

 

Please fix it for us!!!

BangIw
Beginner
28,997 Views

Driver Intel® NPU - Windows*

Installation failed with error code 1000

have try in manual or automatic aplication on my ideapad 5 pro ultra 9 185H
0 Kudos
tommyr87
Beginner
32,016 Views

Glad I'm not the only one. I'm thinking my armor software was blocking it. Driving me crazy.

0 Kudos
GMizusawa
Beginner
31,977 Views

Same problem as all others.

 

Both install methods result in Error 1006 or 1000 with ISDA reporting new driver available afterwards. Device manager indicates the driver was successfully updated.

 

Reinstall attempts permit "Repair" which indicates successful repair, only for the problem repeat.

 

ASUS Vivobook Pro 15 N6506MJ_Q543MJ +  Intel Core Ultra 9 185H

 

GMizusawa_0-1753444236411.png

GMizusawa_1-1753444288800.png

Sitearm
Beginner
30,214 Views

ditto result: driver details show driver present

ditto result: assistant keeps telling me I need to install (again)

ditto result: install program shows "repair"

ditto diagnosis from my POV: it is dsa failure to recognize completed install

gear: surrface pro 11 intel edition

functional impact: to be honest I have NO idea yet what an npu driver is supposed to be doing for me but I am trying to learn

 

 

0 Kudos
webkostas
Beginner
31,871 Views

Hello, same error here. I noticed that when I was trying (repeatedly) to install the drivers, there was the following msg. Of course, there was no other installation going on, and I restarted numerous times too. It seems there is a generic issue/bug with those drivers. Let's hope they will solve and update soon.



webkostas_0-1753451186044.png

 

0 Kudos
Reply